Juniper SFPP-10G-DT-ZRC2 (740-053356) Compatible SFP+ Module
Juniper compatible SFPP-10G-DT-ZRC2 - Key Features
- Compatibility: Juniper
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 80 km
- Guaranteed Link Budget: 23 dB
- Tx Wavelenght: DWDM 89 Ch (C-band 50Ghz)
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Juniper SFPP-10G-DT-ZRC2 Price
SKU:DWDM-10G-SFP-80-TUN-JU
Made to Order - 2 WeeksJuniper compatible SFPP-10G-DT-ZRC2 Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 80 km |
Guaranteed Link Budget | 23 dB |
TX Wavelength | Channel 17-61 (DWDM C-Band 50 GHz, 89 channels) |
RX Wavelength | Channel 17-61 (DWDM, C-Band 50 GHz) |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supportet Ethernet Applications | 10G Ethernet (10.31Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps) |
Optical Transport Network (OTN) Applications | ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU1e (11.049Gbps), OTU1f (11.27Gbps), OTU2 (10.70Gbps), OTU2e (11.095Gbps), OTU2f (11.32Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | ITU 50Ghz Grid: C-Band (Ch17-61) |
Rx Wavelength Bandwidth | 1260 - 1620 nm |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -23 dBm |
Receiver Overload | -6 dBm |
Dispersion | 1600 ps/nm |
Transmitter Type | Monolithic MZM Tunable TOSA |
Receiver Type | APD Photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Juniper compatible SFPP-10G-DT-ZRC2 Datasheet
v4Complete technical specifications and product details
Juniper compatible SFPP-10G-DT-ZRC2 Description
The EdgeOptic SFPP-10G-DT-ZRC2 is a Juniper-compatible tunable 10G DWDM SFP+ transceiver based on the DWDM-10G-SFP-80-TUN platform. The module is manufactured to SFP+ MSA (SFF-8431) specifications and operates over duplex single-mode fiber with a rated 23 dB optical link budget, reaching up to 80 km. The 80 km distance assumes minimum optical budget and average fiber attenuation; actual reach depends on installed plant loss, connectors, and splices. The SFPP-10G-DT-ZRC2 uses a tunable laser transmitter operating across ITU C-Band channels on the 50 GHz DWDM grid and an APD receiver. This tunable DWDM SFP+ module supports software-configurable wavelength selection, allowing a single SKU to replace any of the fixed-wavelength DWDM channel variants for simplified inventory management. DDM/DOM optical diagnostics report transmit power, receive power, temperature, bias current, and supply voltage via the MSA-compatible EEPROM interface.
The module has a duplex LC/UPC connector and operates within a 0–70 °C commercial temperature range. The chipset supports data rates from 8.5 to 11.32 Gbps, including 10G Ethernet (10.31 Gbps), STM-64 (9.95 Gbps), 10G Fibre Channel (10.52 Gbps), 8G Fibre Channel (8.5 Gbps), OTU2 (10.71 Gbps), and OTU2e (11.09 Gbps). Supported applications depend on the host port capabilities and are confirmed during the ordering process. Typical deployments include metro network backbones, regional carrier interconnects, inter-city data center interconnects, and service provider distribution networks over 80 km single-mode fiber. The multi-rate capability accommodates mixed-speed network environments where legacy SDH/SONET and 10G Ethernet coexist on the same DWDM infrastructure.
The EdgeOptic SFPP-10G-DT-ZRC2 is CE/RoHS certified and compliant with Class 1 laser safety standards (IEC 60825-1). The module EEPROM is programmed with Juniper-recognized vendor coding, so it is identified as a supported transceiver and responds to standard Junos wavelength tuning commands. Tunable DWDM wavelength configuration in Junos is performed under the chassis hierarchy; refer to the Juniper DWDM optical interface configuration guide for exact syntax on your platform. The SFPP-10G-DT-ZRC2 (Juniper PN 740-053356) is supported on Juniper MX, QFX, EX, PTX, and SRX series platforms. Juniper does not hard-block third-party optics; properly coded compatible transceivers are accepted without extra configuration on most platforms. Each module undergoes optical parameter measurements, connector endface cleanliness inspection, and EEPROM data validation before shipment to confirm correct vendor-specific encoding and compliance with MSA specifications.
Frequently Asked Questions
How do I set the wavelength on the SFPP-10G-DT-ZRC2 in Junos?
In Junos OS, tunable DWDM wavelength configuration is performed under the chassis hierarchy. The exact command syntax varies by platform and Junos version. On MX and PTX series, refer to the Juniper DWDM optical interface configuration guide for the correct chassis fpc/pic/port path. The valid tuning range covers the C-band from approximately 1528 nm to 1564 nm, with a default of 1550.12 nm (ITU channel C34). The EdgeOptic SFPP-10G-DT-ZRC2 responds to Junos tuning commands because the EEPROM carries Juniper-recognized vendor coding.
Do Juniper MX and QFX switches block third-party SFPP-10G-DT-ZRC2 modules?
Juniper does not hard-block third-party optics. Most Juniper platforms (MX, QFX, EX, SRX, PTX) accept properly coded compatible transceivers without extra configuration. The EdgeOptic SFPP-10G-DT-ZRC2 is coded with Juniper-recognized EEPROM data and is identified as a supported optic on current Juniper platforms.