Juniper SRX-SFP-10GE-ER Compatible 10GBASE-ER SFP+ Module

Juniper
SFP+
10G
Duplex
40 km
Juniper SRX-SFP-10GE-ER Compatible SFP+ Module

Juniper compatible SRX-SFP-10GE-ER - Key Features

  • Compatibility: Juniper
  • Media Type: Single-Mode Fiber (SMF)
  • Fiber Count: Duplex
  • Connector: Double LC/UPC
  • Maximum Distance: 40 km
  • Average Link Budget: 15 dB
  • Tx Wavelength: 1550 nm
  • Supported Data Rate: 1.25 Gbps - 11.32 Gbps
  • DDM/DOM: Supported
  • Temperature Range: Standard 0°-70°C

Juniper SRX-SFP-10GE-ER Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
64.26
Choice of 0+
Telecoms & Integrators Globally

Juniper compatible SRX-SFP-10GE-ER Specifications

Form Factor
SFP+
Media Type
Single-Mode Fiber (SMF)
Fiber Count
Duplex
Connector
Double LC/UPC
Maximum Distance
40 km
Average Link Budget
15 dB
TX Wavelength
1550 nm
RX Wavelength
1550 nm
Supported Data Rate
1.25 Gbps - 11.32 Gbps
Supported Ethernet Applications
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps)
Supported Fiber Channel Applications
10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps)
SDH/SONET Standards
STM-64 (9.95Gbps)
DDM/DOM
Supported
Tx Wavelength Bandwidth
37 nm (1528-1565 nm)
Rx Wavelength Bandwidth
37 nm (1528-1565 nm)
Minimum Transmitting Power
-1 dBm
Maximum Transmitting Power
4 dBm
Receiver Sensitivity
-16 dBm
Receiver Overload
0 dBm
Dispersion
800-1000 ps/nm
Transmitter Type
DFB Laser
Receiver Type
PIN photodiode
Temperature Range
Standard 0°-70°C
Power
+3.3V single power supply
Compliance
CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA

Juniper compatible SRX-SFP-10GE-ER Datasheet

v4

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Juniper compatible SRX-SFP-10GE-ER Description

EdgeOptic's SRX-SFP-10GE-ER compatible is a Juniper-coded version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver, built for 10 Gigabit Ethernet links up to 40 km over duplex single-mode fiber. It carries the Juniper SRX Series ordering code SRX-SFP-10GE-ER, and the EEPROM is coded with the Juniper vendor identifier so Junos recognizes the module on SRX Series security gateways.

The module operates at 1550 nm over duplex single-mode fiber with an LC/UPC connector. Transmit power is rated from −1 to +4 dBm, receiver sensitivity is better than −16 dBm, and receiver overload is 0 dBm, giving a 15 dB link budget for spans up to 40 km. The protocol scope on SRX Series security gateways is Ethernet only: 10 Gigabit Ethernet at 10.3125 Gbps and 1 Gigabit Ethernet at 1.25 Gbps. The module runs on a single 3.3 V supply across the 0 to 70 °C standard operating range.

Digital optical monitoring is supported per the SFF-8431 specification, reporting module temperature, supply voltage, laser bias current, transmit optical power and receive optical power in real time. Engineers can read these values from the Junos optics diagnostics output to confirm both ends of a link sit within spec during commissioning. The transceiver complies with the SFP MSA and SFF-8431 electrical interface, carries CE marking, meets RoHS requirements, and is rated IEC 60825-1 Class 1 for laser safety.

The receiver tolerates chromatic dispersion in the 800 to 1000 ps/nm range typical of a 40 km 1550 nm single-mode path, and the data path covers the 1.25 to 11.32 Gbps range that 10 Gigabit and 1 Gigabit Ethernet require. SRX-SFP-10GE-ER suits long-reach security gateway uplinks, branch-to-data-center handoffs and metro Ethernet connections where a 40 km single-mode span is required. It works on Juniper SRX Series security gateways; verify the module against the transceiver table for your specific SRX model and Junos release before deployment.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, every module ships after optical parameter measurement and EEPROM data validation. The SRX-SFP-10GE-ER compatible ships next business day from EU stock with a lifetime warranty. For deployment questions or a tailored quote, contact our sales team.

Frequently Asked Questions

Does SRX-SFP-10GE-ER need any CLI configuration to run a compatible module on Juniper SRX firewalls?

EdgeOptic codes the EEPROM with the Juniper vendor identifier so Junos recognizes the module on SRX Series gateways. Junos logs a warning for transceivers it does not recognize but does not block traffic on the port, and the Juniper vendor code addresses that message. There is no platform-wide CLI override required to bring the link up. If a warning appears, confirm the module reading in the Junos optics diagnostics output and check the transceiver table for your SRX model and Junos release.