Standard recommended retail price without VAT.
S+23LC10D
MikroTik Compatible S+23LC10D SFP+ Module
# Key Highlights
- Type:SFP+
- Compatibility:MikroTik Compatible
- Tx/Rx Wavelength: 1270 nm / 1330 nm
- Media Type: Single-Mode Fiber (SMF)
- Optical Budget: 6.2 dB
- Max. Distance: 10 km
- Data Rate: 1.25-10.31 Gbps
- Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: BIDI-10G-SFP-10A-MT
€16.07
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Single-Mode Fiber (SMF) |
|---|---|
| TX Wavelength: | 1270 nm |
| RX Wavelength: | 1330 nm |
| Minimum Optical Budget: | 6.2 dB |
| Maximum Distance: | 10km |
| Supported Data Rate: | 1.25-10.31 Gbps |
| Supported Applications: | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
| DDM/DOM: | Supported |
| Temperature Range: | Standard 0°-70°C |
| Connectors: | Single LC |
| Tx Wavelength Bandwidth: | 40 nm (1250-1290 nm) |
| Rx Wavelength Bandwidth: | 40 nm (1310-1350 nm) |
| Minimum Transmitting Power: | -7.8 dB |
| Maximum Transmitting Power: | 1 dB |
| Receiver Sensitivity: | -14 dBm |
| Receiver Overload: | 0.5 dBm |
| Dispersion: | 70-100 ps/nm |
| Transmitter Type: | DFB Laser |
| Receiver Type: | PIN photodiode |
| Power: | +3.3V single power supply |
| Chipset: | MAXIM, MINDSPEED, SEMTECH |
| Compliance: | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
# Product Documentation
Multi-Vendor MSA Compatible BIDI-10G-SFP-10A SFP+ Datasheet
MikroTik Compatible S+23LC10D Module is based on our product BIDI-10G-SFP-10A. When You will order it will be encoded with MikroTik code and it will be labeled with part number: BIDI-10G-SFP-10A-MT, where MT means MikroTik Compatible. Above You can download datasheet of our BIDI-10G-SFP-10A product.
# Product Description
S+23LC10D is MikroTik Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. The S+23LC10D has a minimum guaranteed optical budget of 6.2 dB, with in most cases is enough to reach about 10 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This MikroTik compatible transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1270 nm and 1330 nm PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. S+23LC10D operates in a standard 0°-70°C temperature range and has Single LC interface. MikroTik compatible S+23LC10D support 1.25-10.31 Gbps data rate and such applications as 10G Ethernet (10.31Gbps) and Gigabit Ethernet (1.25 Gbps). Originally MikroTik provides S+2332LC10D. In the kit there are two transceivers: this S+23LC10D and S+32LC10D. The S+23LC10D SFP+ Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home routing and switching equipment, Mobile operator core and backhaul SDH/SONET applications, Data Center networking for Ethernet connections and other optical links.
Transceiver is CE/RoHS certified and it is Compliant with product safety standards. S+23LC10D SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP+ transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP+ transceiver EEPROM memory data validation tests – Contact us.
