MikroTik Compatible 100G CWDM4/CLR4 2km Module

XQ+31LC02D is MikroTik Compatible 100G QSFP28 CWDM4 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of single-mode optical fiber. Module adopts CWDM MUX/DEMUX technology with central wavelength of the lanes at: 1271, 1291, 1311, 1331 nm. On the transmission side module converts 4 electrical input channels (each up to 28.05Gbps) into 4 lanes with optical signal and multiplexes them into a single channel of 100 Gbps optical transmission, reversely on the receiver side, module optically de-multiplexes 100 Gbps input into 4 lanes signals and converts them to 4 lanes of electrical data (each up to 28.05Gbps). Module has minimum guaranteed optical budget of 7 dB, which in most cases is enough to reach 2 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. XQ+31LC02D uses cooled 4x28Gb/s LAN WDM TOSA (1271, 1291, 1311, 1331 nm) laser transmitters and 4x28Gb/s PIN ROSA receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally module supports FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. XQ+31LC02D operates in Standard 0°-70°C temperature range and has double LC connector. 100G- CWDM4/CLR4 QSFP28 support up to 103.125-112.2 Gbps data rate and such applications as 100G Ethernet (103.125Gbps), Optical Transport Network OTU4 4l1-9D1F (112 Gbps) and 128G Fiber Channel (112.2 Gbps). XQ+31LC02D optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.

Transceiver is CE/RoHS certified and is compliant with product safety standards. XQ+31LC02D Transceiver is fully compliant to QSFP28 Multi Source Agreement (MSA), 100G CWDM4 MSA and 100G CLR4 Alliance, Optical Transport Network OTU4 4l1-9D1F and 128G Generation 6 Fiber Channel standards. Consequently compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for CWDM4/CLR4 QSFP28 transceiver in order to make it work in almost any brand equipment. We will be glad to know your requirements - Contact Us.