Standard recommended retail price without VAT.
OWDM-100G-Q28-30-XXX
O-Band DWDM 100G QSFP28 MSA Compatible 100G Transceiver: OWDM-100G-Q28-30
# Key Highlights
- Type: 100G QSFP28 O-band DWDM Single Wavelength
- Compatibility: Multi-Vendor MSA Compatible
- Tx/Rx Wavelength: 16 channels 1295.56 nm to 1312.58 nm/ 1290nm to 1325 nm
- Laser: DFB Laser
- Modulation: PAM4
- Fiber Type: Single-Mode Fiber (SMF)
- Connectors: Double LC
- Optical Budget: 14.7 dB
- Max. Distance: up to 30km
- Data Rate: 103.125 Gbps
- FEC Forward Error Correction: Supported
- DDM/DOM: Supported
- Power Consumption: ≤5.5 W
- Temperature: Standard 0°-70°C
# Pricing & Ordering
SKU: OWDM-100G-Q28-30-MS
€2,477.48
Lead Time: 4-6 Weeks in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Single-Mode Fiber (SMF) |
|---|---|
| Connectors: | Double LC |
| TX Wavelength: | Ch. 000 (1303.45 nm), Ch. 002 (1302.31 nm), Ch. 004 (1301.18 nm), Ch. 006 (1300.05 nm), Ch. 008 (1298.93 nm), Ch. 010 (1297.80 nm), Ch. 012 (1296.68 nm), Ch. 014 (1295.56 nm), Ch. 084 (1312.58. nm), Ch. 086 (1311.43 nm), Ch. 088 (1310.28 nm), Ch. 090 (1309.14 nm), Ch. 092 (1308.00 nm), Ch. 094 (1306.85 nm), Ch. 096 (1305.72 nm), Ch. 098 (1304.58 nm) |
| RX Wavelength: | 1290nm to 1325 nm |
| Minimum Optical Budget: | 14.7 dB |
| Maximum Distance: | 30km |
| Supported Data Rate: | 103.125 Gbps |
| Supported Applications: | 100G Ethernet (103.125Gbps) |
| Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
| DDM/DOM: | Supported |
| Forward Error Correction (FEC): | Supported |
| Transmitter Type: | DFB Laser |
| Tx Wavelength Bandwidth: | λC +/-0.1nm |
| Average Launch Power (Min) Each Lane: | 0 dBm |
| Average Launch Power (Max) Each Lane: | 5.6 dBm |
| Extinction Ratio (Min): | 6 dB |
| Receiver Type: | APD |
| Rx Wavelength Bandwidth: | 1290-1325nm |
| Average Receiver Sensitivity (Min) Each Lane: | -3 dBm |
| Average Receiver Sensitivity (Max) Each Lane: | -14.7 dBm |
| Receiver Overload: | -2.4 dBm |
| Temperature Range: | Standard 0°-70°C |
| Storage Temperature: | -40° to 85°C |
| Relative Humidity: | 5 to 85% |
| Power Consumption: | ≤4.7W |
| Power: | +3.3V |
| Compliance: | Class 1 laser product IEC-60825, QSFP28 MSA SFF-8636, QSFP28 MSA |
# Product Documentation
# Product Description
The Multi-Vendor MSA Compatible Single-Wavelength O-Band DWDM 100G QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver OWDM-100G-Q28-30 is designed for multiple channel 100G transmission over G.652 Single-Mode Fiber (SMF). Efficient multiple 100G Ethernet signal transmission over double or single fiber is a turning point in the optical communication industry, allowing Data Centers, Mobile Operators, and Fixed Operators to transition from legacy 10G DWDM/CWDM connections to high speed 100G connections.
The OWDM-100G-Q28-30 100G O-Band DWDM QSFP28 transceiver has a minimum guaranteed optical budget of 14.7 dB, which is typically enough to reach a distance of 30 km. There is no need for additional DCM (dispersion compensation modules) units or EDFA amplifiers because dispersion for O-Band channels is much lower than for C-Band DWDM channels, which require these extra devices in similar circumstances. We have compiled a list of typical applications for O-Band 100G WDM transceivers and can provide complete solutions, including custom designed O-Band DWDM filters for either Double Fiber or Single Fiber applications. 100G O-band DWDM transceivers support 16 O-Band WDM 200GHz spaced channels that are aligned to an 800GHz LAN-WDM grid. Supported channels are starting from 1295.56 nm up to 1312.58 nm. The 100G O-band DWDM QSFP28 transceiver module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. The 100G O-band DWDM QSFP28 transceiver operates in the standard 0°-70°C temperature range and has a duplex LC optical connector and on the electrical side supports 4×25.78 Gbps CAUI-4 host interface which is compatible with standard 100G Ethernet switches. O-band 100G WDM QSFP28 transceiver has integrated PAM4 (Pulse Amplitude Modulation 4-level) DSP (Digital Signal Processor) chip and module uses a PAM4 gearbox to convert the 4×25.78 Gbps CAUI-4 electrical signals to a single lane PAM4 100G optical signal. The module’s optical interface utilizes a single wavelength in the O-band with wavelengths aligned to the LAN-WDM grid with 200GHz channel spacing while the receiver section uses a wideband APD detector and is WDM channel independent. Module has an integrated FEC, while FEC on the host platform needs to be disabled.
100G O-band DWDM QSFP28 transceivers are certified and are compliant with product safety standards. Transceivers are fully compliant to QSFP28 Multi Source Agreement SFF-8636, QSFP28 MSA digital monitoring functions and are Laser Class 1 compliant according to International Safety Standard IEC-60825. Consequently, compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules.
100G O-band DWDM QSFP28 transceivers can be used in Cisco, Juniper, Nokia, HP, Huawei and other manufacturers equipment which have 100G QSFP28 port capabilities. So far originally almost none of these manufacturers have O-Band 100G WDM QSFP28 transceivers in their portfolio, however we have accumulated deep expertise in custom-encoded firmware for O-band DWDM QSFP28 in order to make these modules work in almost any brand of equipment. If you would like to receive help with total solutions – we will be glad to know your requirements and help – Contact Us.
