100-00442 Sandvine Compatible 10G 80km SMF SFP+ Transceiver
Sandvine compatible 100-00442 - Key Features
- Compatibility: Sandvine
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 80 km
- Average Link Budget: 23 dB
- Tx Wavelength: 1550 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Sandvine 100-00442 Price
Sandvine compatible 100-00442 Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 80 km |
Average Link Budget | 23 dB |
TX Wavelength | 1550 nm |
RX Wavelength | 1550 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Rx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Minimum Transmitting Power | 0 dBm |
Maximum Transmitting Power | 5 dBm |
Receiver Sensitivity | -24 dBm |
Dispersion | 1600 ps/nm |
Transmitter Type | EML Laser |
Receiver Type | APD Photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Sandvine compatible 100-00442 Datasheet
v3Complete technical specifications and product details
Sandvine compatible 100-00442 Description
EdgeOptic's 100-00442 compatible is a Sandvine-coded 80 km 10G SFP+ optic built to the same optical specification as the EdgeOptic 10G-SFP-80 multi-vendor transceiver. It ships with EEPROM coded to the Sandvine part number so the module identifies cleanly in Sandvine appliances without manual intervention. The 80 km 10G SFP+ optic operates at 1550 nm over single-mode fiber and slots into any SFP+ host cage that accepts a standard long-reach module, with no manual override needed at the appliance.
The optical build carries a 1550 nm EML transmitter and an APD receiver across a 23 dB link budget, which is the loss allocation that covers the full 80 km span on G.652 single-mode fiber. Transmit power runs from 0 to +5 dBm, receiver sensitivity is better than −24 dBm, and chromatic dispersion tolerance is 1600 ps/nm. The duplex LC interface mates to standard SMF patch cords, and DDM/DOM diagnostics per SFF-8472 report temperature, laser bias current, transmit and receive optical power, and supply voltage to the host for live monitoring. This is the Standard 0 to 70 degrees C commercial build running on a single +3.3V supply, with CE, RoHS, and IEC 60825-1 Class 1 laser-safety compliance.
Sandvine deep-packet-inspection and policy-enforcement appliances present Ethernet interfaces, so the working scope for the 100-00442 is 10 Gigabit and Gigabit Ethernet transport across metro and inter-site links. The 80 km class is a de-facto SFP+ MSA long-reach design built to SFF-8431, not an IEEE 802.3ae mode, so the reach figure follows from the link budget and the average fiber attenuation on the route rather than from a fixed standard. Confirm both ends of the link run a matched 1550 nm long-reach optic during commissioning, and budget for any patch-panel and splice losses on long spans. For part-class confirmation or project quantities, contact our sales team.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty.