10G DWDM SFP+ 80km Industrial C-Band Transceiver: DWDM-10G-SFP-80I

Industrial 10G DWDM SFP+ 80km Overview
The DWDM-10G-SFP-80I is an industrial-temperature 10G DWDM SFP+ transceiver built for 80 km single-mode links on the ITU C-band grid. It covers all 45 100 GHz-spaced channels from Channel 17 to Channel 61, with a duplex LC/UPC connector and a 23 dB average link budget. Supported data rates run 1.25 to 11.32 Gbps, covering 10G Ethernet, 1G to 10G Fiber Channel, OTN framing through ODU2e and OTU2f, and SDH/SONET STM-64. Rated for -40°C to +85°C operation versus 0°C to +70°C on the standard DWDM-10G-SFP-80, the module is built for outdoor cabinets, railway and transportation communications, electric utility network infrastructure, and remote wireless base station sites where ambient temperature swings exceed commercial-grade limits. The rating applies to the module case, which can run hotter than cabinet ambient air, and DDM/DOM reports case temperature, optical power, and bias current so operators can monitor the module remotely after deployment. The transceiver uses an EML laser transmitter and APD receiver, complies with SFF-8431 and the SFP MSA, and carries CE, RoHS, and Class 1 laser safety certification under FDA/IEC 60825-1. It works across network equipment with standard SFP+ cages; channel assignment should be verified against the network's ROADM or OADM wavelength plan before ordering.
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 80 km
- Average Link Budget: 23 dB
- Tx Wavelength: DWDM 45Ch (C-band 100Ghz)
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Industrial -40°C - +85°C
10G DWDM SFP+ 80km Transceiver Pricing
10G DWDM SFP+ 80km Industrial C-Band Transceiver Specification
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 80 km |
Average Link Budget | 23 dB |
TX Wavelength | Channel 17-61 (DWDM C-Band 100 GHz, 45 channels) |
RX Wavelength | Channel 17-61 (DWDM, C-Band 100 GHz) |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
Optical Transport Network (OTN) Applications | ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU1e (11.049Gbps), OTU1f (11.27Gbps), OTU2 (10.70Gbps), OTU2e (11.095Gbps), OTU2f (11.32Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 100GHz (0.8nm) |
Rx Wavelength Bandwidth | 1260 - 1620 nm |
Minimum Transmitting Power | 0 dBm |
Maximum Transmitting Power | 5 dBm |
Receiver Sensitivity | -23 dBm |
Receiver Overload | -6 dBm |
Dispersion | 1600 ps/nm |
Transmitter Type | EML Laser |
Receiver Type | APD Photodiode |
Temperature Range | Industrial -40°C - +85°C |
Power | +3.3V single power supply |
Compliance | ,CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Power Consumption (Max) | 2 W |
10G DWDM SFP+ 80km Industrial C-Band Transceiver Datasheet
v2Complete technical specifications and product details
10G DWDM SFP+ 80km Industrial C-Band Transceiver Description
The DWDM-10G-SFP-80I is an industrial-temperature 10G DWDM SFP+ transceiver for 80 km single-mode links on the C-band grid. It spans 45 channels at 100 GHz spacing, Channel 17 through 61, with a duplex LC/UPC connector and a 23 dB average link budget.
Operating temperature is rated at -40°C to +85°C, versus 0°C to +70°C on the standard DWDM-10G-SFP-80. The rating is measured at the module case, which runs hotter than cabinet ambient air from internal heat and port density. DDM/DOM reports case temperature, optical power, bias current, and supply voltage for remote monitoring after deployment.
The 45-channel C-band grid uses 100 GHz (0.8 nm) spacing, which requires the laser to hold its wavelength through temperature swings to stay on-channel and avoid crosstalk with neighboring channels, a tighter requirement given the industrial module's wider operating window.
Industrial-temperature DWDM optics like this one are deployed in outdoor telecom cabinets, railway and transportation networks, electric utility infrastructure, remote wireless base station sites, and outdoor surveillance links, where enclosure temperatures regularly exceed commercial-grade ratings.
The module pairs an EML laser transmitter with an APD receiver, complies with SFF-8431 and the SFP MSA, and carries CE, RoHS, and Class 1 laser safety certification under FDA/IEC 60825-1. It works across network equipment with standard SFP+ cages; channel assignment should be verified against the network's ROADM or OADM wavelength plan before ordering.
The DWDM-10G-SFP-80I is made to order with a 2-week lead time. For channel-specific ordering guidance, contact our sales team.
Frequently Asked Questions
What is the difference between industrial-temperature and extended-temperature optical transceivers?
Industrial (I-Temp) transceivers are rated -40°C to +85°C. Extended-temperature (E-Temp), the classification Cisco uses for parts rated -5°C to +85°C, sits in between. Standard commercial transceivers are rated 0°C to +70°C. The DWDM-10G-SFP-80I is built to the industrial -40°C to +85°C class, the widest of the three.
What temperature range does this industrial DWDM transceiver support?
The DWDM-10G-SFP-80I is rated for -40°C to +85°C operation. The standard DWDM-10G-SFP-80 covers 0°C to +70°C; choose the industrial model for outdoor cabinets or other sites with temperature extremes beyond that range.
Is the temperature rating based on module case temperature or cabinet ambient temperature?
The -40°C to +85°C rating applies to the module case, not the surrounding cabinet air. Case temperature can run higher than cabinet ambient because of internal heat generation and port density, which matters when planning deployments in unheated or outdoor enclosures.
Can DDM/DOM monitor case temperature on remote installations?
Yes. DDM/DOM on the DWDM-10G-SFP-80I reports module case temperature along with Tx and Rx optical power, laser bias current, and supply voltage, so operators can monitor thermal and optical health remotely after the module is installed.
Can this 10G DWDM SFP+ run at lower rates such as 1G?
Yes. The DWDM-10G-SFP-80I supports a data rate range of 1.25 to 11.32 Gbps, covering 10G Ethernet and 1G through 10G Fiber Channel in addition to OTN and STM-64 framing. Actual rate support depends on what the host port negotiates; verify the port configuration against the rate needed.