Source Photonics SP-25E-LR-xDFR Compatible 25GBASE-LR SFP28

Source Photonics compatible SP-25E-LR-xDFR - Key Features
- Compatibility: Source Photonics
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 10 km
- Average Link Budget: 5 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 8.5 Gbps - 25.78 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Source Photonics SP-25E-LR-xDFR Price
Source Photonics compatible SP-25E-LR-xDFR Specifications
Form Factor | SFP28 |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 10 km |
Average Link Budget | 5 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 8.5 Gbps - 25.78 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), 25G Ethernet (25.78Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | DML Laser |
Average Launch Power (Min) Each Lane | -7 dBm |
Average Launch Power (Max) Each Lane | 2 dBm |
Extinction Ratio (Min) | 3.5 dB |
Receiver Type | PIN photodiode |
Rx Wavelength Bandwidth | 40 nm |
Average Receiver Sensitivity (Min) Each Lane | -12 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2 dBm |
Receiver Overload | 3 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 1.2 W |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFF-8472, IEEE 802.3cc, SFF-8432, SFP28 MSA |
Source Photonics compatible SP-25E-LR-xDFR Datasheet
v4Complete technical specifications and product details
Source Photonics compatible SP-25E-LR-xDFR Description
EdgeOptic's SP-25E-LR-xDFR compatible is a Source Photonics-coded version of the EdgeOptic 25G-SFP28-10 multi-vendor 25GBASE-LR transceiver. It carries the EEPROM identification a Source Photonics-equipped host expects, so it drops into 25GBASE-LR slots and reports through the host management interface like the original module. One universal EdgeOptic part covers multiple vendor codes, and this listing is the Source Photonics build of it.
The original Source Photonics SP-25E-LR-xDFR is a 25G LR Lite SFP28 specified for up to 2 km over single-mode fiber. The EdgeOptic compatible alternative is a full 10 km 25GBASE-LR SFP28, so it covers the 2 km application the SP-25E-LR-xDFR was selected for and also supports longer single-mode runs where the fiber plant is, or may become, longer. If a deployment is fixed at the short LR Lite reach, the EdgeOptic compatible still operates correctly within that distance.
The transceiver operates at 1310 nm over duplex single-mode fiber on a Double LC/UPC connection and carries a 5 dB average optical path loss budget. Transmit launch power runs from a minimum of −7 dBm to a maximum of +2 dBm, receiver sensitivity is rated at −12 dBm, and the receiver tolerates an overload of +3 dBm. The host sets up the link to IEEE 802.3cc; the module does not perform forward error correction, so any FEC runs host-side when the host enables it.
The module runs both 25G Ethernet at 25.78 Gbps and 10G Ethernet at 10.31 Gbps, with supported serial rates of 8.5 and 25.78 Gbps. DDM/DOM is supported for live monitoring of transmit power, receive power, laser bias, temperature, and supply voltage. Power draw is held to 1.2 W maximum, and the module operates across the 0 to 70 °C commercial temperature range. It is built to the SFP28 MSA and SFF-8431, SFF-8432 and SFF-8472 specifications, and is CE marked, RoHS compliant, and Class 1 laser safe. The SP-25E-LR family uses an x temperature wildcard: SP-25E-LR-CDFR is the commercial 0 to 70 °C build and SP-25E-LR-IDFR is the industrial build; this EdgeOptic compatible matches the commercial CDFR grade.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the SP-25E-LR-xDFR compatible ships next business day from EU stock with a lifetime warranty. For help confirming reach requirements before ordering, contact our sales team.
Frequently Asked Questions
What is the reach difference between the SP-25E-LR-xDFR and the SP-25E-LR-xDFD?
The original Source Photonics SP-25E-LR-xDFR is a 25G LR Lite SFP28 rated for up to 2 km on single-mode fiber, while the SP-25E-LR-xDFD is the 10 km 25GBASE-LR variant. The EdgeOptic SP-25E-LR-xDFR compatible on this page is a full 10 km 25GBASE-LR module, so it covers the 2 km application of the original part and supports longer single-mode spans as well. If a project is strictly a short LR Lite link, the EdgeOptic compatible still works within that 2 km distance.