Source Photonics SPQ-CE-DR-CDFB Compatible 100GBASE-DR QSFP28 500m
Source Photonics compatible SPQ-CE-DR-CDFB - Key Features
- Compatibility: Source Photonics
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 500 m
- Average Link Budget: 3 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 106.25 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Source Photonics SPQ-CE-DR-CDFB Price
Source Photonics compatible SPQ-CE-DR-CDFB Specifications
Form Factor | QSFP28 |
Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 500 m |
Average Link Budget | 3 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 106.25 Gbps |
Supported Ethernet Applications | 100G Ethernet PAM4 (106.25 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 1304.5- 1317.5 nm |
Average Launch Power (Min) Each Lane | -2.4 dBm |
Average Launch Power (Max) Each Lane | 4 dBm |
Extinction Ratio (Min) | 5 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 1304.5- 1317.5 nm |
Average Receiver Sensitivity (Min) Each Lane | -5.4 dBm |
Average Receiver Sensitivity (Max) Each Lane | 4 dBm |
Receiver Overload | 6.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 4.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3cd, 100GBASE-DR, 100G Lambda MSA, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Source Photonics compatible SPQ-CE-DR-CDFB Datasheet
v2Complete technical specifications and product details
Source Photonics compatible SPQ-CE-DR-CDFB Description
EdgeOptic's SPQ-CE-DR-CDFB compatible is a Source Photonics-coded version of the EdgeOptic 100G-QSFP28-SL500 multi-vendor 100GBASE-DR transceiver. Source Photonics is a transceiver OEM, and this is their 100G-DR1 500m QSFP28 part. The module carries 100G Ethernet over duplex single-mode fiber to 500m per IEEE 802.3cd 100GBASE-DR and the 100G Lambda MSA, coded with Source Photonics-recognized EEPROM so it is read as a known optic during commissioning.
The module uses a single 1310nm PAM4 lane in the 1304.5 to 1317.5nm band, with an EML laser transmitter and a PIN photodiode receiver. Signaling runs at 106.25 Gbps with a 3 dB minimum optical budget, the figure used to derive the 500m reach over standard single-mode cabling. DOM is supported for live monitoring of optical power, temperature, bias, and voltage. The connector is duplex LC and the module operates across the commercial 0 to 70C range.
100GBASE-DR carries RS(544,514) KP4 forward error correction inside the module DSP, so host-side FEC stays disabled to avoid double-FEC on the link. Both ends of the span must run the same single-lambda 100GBASE-DR optic at 500m. Don't pair it with a four-lane SR4, CWDM4, or PSM4 module, which use a different lane plan and won't interoperate. Confirm the port speed and FEC settings during commissioning.
The module is built to the QSFP28 MSA and SFF-8665, and carries CE and RoHS marking. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, it ships with Source Photonics-recognized coding for clean recognition on networking equipment. Made to order, 2-week lead time, lifetime warranty included. For platform confirmation or bulk pricing, contact our sales team.