Ubiquiti UACC-OM-MM-1G-D-2 Compatible 1G SFP LC SX MMF Module
Ubiquiti Networks compatible UACC-OM-MM-1G-D-2 - Key Features
- Compatibility: Ubiquiti Networks
- Media Type: Multi-Mode Fiber (MMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 550 m
- Average Link Budget: 7.5 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.063 Gbps - 1.25 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Ubiquiti Networks UACC-OM-MM-1G-D-2 Price
In Stock - Ships Next Business DayUbiquiti Networks compatible UACC-OM-MM-1G-D-2 Specifications
Form Factor | SFP |
Media Type | Multi-Mode Fiber (MMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 550 m |
Average Link Budget | 7.5 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.063 Gbps - 1.25 Gbps |
Supported Ethernet Applications | Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 1G Fiber Channel (1.0625 Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -9.5 dBm |
Maximum Transmitting Power | 3 dBm |
Receiver Sensitivity | -17 dBm |
Receiver Overload | -3 dBm |
Dispersion | 110 ps/nm ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Ubiquiti Networks compatible UACC-OM-MM-1G-D-2 Datasheet
v3Complete technical specifications and product details
Ubiquiti Networks compatible UACC-OM-MM-1G-D-2 Description
EdgeOptic's UACC-OM-MM-1G-D compatible is a Ubiquiti-coded version of the EdgeOptic 1.25G-SFP-550D multi-vendor 1000BASE-SX transceiver. It matches the UniFi 1G Multi-Mode Optical Module spec: an 850nm VCSEL transmitter, a PIN photodiode receiver, and a duplex LC interface over multimode fiber. The module runs dual-rate, covering 1000BASE-SX Gigabit Ethernet at 1.25 Gbps and 1G Fibre Channel short-wave at 1.0625 Gbps, in line with IEEE 802.3z and FC-PI. Ubiquiti sells the OEM part as a two-pack under UACC-OM-MM-1G-D-2; the EdgeOptic compatible is a single module equal to one UACC-OM-MM-1G-D, so check your required quantity before ordering.
This is the multimode (MMF) module, not the single-mode UACC-OM-SM-1G-D. With a 7.5 dB optical budget, it reaches up to 550m over OM2 (50/125) multimode fiber per the 1000BASE-SX specification. It operates from a +3.3V supply across a 0 to 70°C commercial temperature range. The EdgeOptic compatible adds DDM/DOM digital diagnostics, which the OEM module does not provide, so the host can read live transmit power, receive power, temperature, and bias-current telemetry on the port.
The UACC-OM-MM-1G-D is the current Ubiquiti 1G MMF module and replaces the older UF-MM-1G. EdgeOptic codes the module with Ubiquiti-recognized EEPROM so it is accepted on UniFi switches and other Ubiquiti SFP-equipped devices without an unsupported-transceiver workaround. When you fit a 1G SFP into a 10G SFP+ port, some switch models need the port speed set to 1 Gbps manually rather than auto-negotiating, so check your switch port settings during commissioning.
The module is CE and RoHS certified, rated Class 1 Laser per IEC/EN 60825-1, and built to the SFP INF-8074i MSA. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, it ships next business day from EU stock with a lifetime warranty. For volume pricing or help matching the right part to your gear, contact our sales team.
Frequently Asked Questions
Is the UACC-OM-MM-1G-D-2 a replacement for the older Ubiquiti UF-MM-1G?
Yes. The UACC-OM-MM-1G-D is the current-generation Ubiquiti 1G multimode module and replaces the older UF-MM-1G U-Fiber part. Both are 850nm 1000BASE-SX modules over duplex LC multimode fiber. If you are sourcing replacements for UF-MM-1G ports, the EdgeOptic UACC-OM-MM-1G-D compatible is the equivalent single module.
Will the UACC-OM-MM-1G-D work in an SFP+ port on a UniFi switch?
It fits and works in SFP+ ports that accept 1G optics, but some UniFi 10G SFP+ ports do not auto-negotiate down to 1 Gbps. On those models you set the port speed to 1 Gbps full-duplex manually in the controller. Check the port configuration during commissioning rather than relying on auto-negotiation.