Ubiquiti UACC-OM-SFP28-LR Compatible 25GBASE-LR SFP28, 10 km SMF
Ubiquiti Networks compatible UACC-OM-SFP28-LR - Key Features
- Compatibility: Ubiquiti Networks
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 10 km
- Average Link Budget: 5 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 8.5 Gbps - 25.78 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Ubiquiti Networks UACC-OM-SFP28-LR Price
In Stock - Ships Next Business DayUbiquiti Networks compatible UACC-OM-SFP28-LR Specifications
Form Factor | SFP28 |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 10 km |
Average Link Budget | 5 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 8.5 Gbps - 25.78 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), 25G Ethernet (25.78Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | DML Laser |
Average Launch Power (Min) Each Lane | -7 dBm |
Average Launch Power (Max) Each Lane | 2 dBm |
Extinction Ratio (Min) | 3.5 dB |
Receiver Type | PIN photodiode |
Rx Wavelength Bandwidth | 40 nm |
Average Receiver Sensitivity (Min) Each Lane | -12 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2 dBm |
Receiver Overload | 3 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 1.2 W |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFF-8472, IEEE 802.3cc, SFF-8432, SFP28 MSA |
Ubiquiti Networks compatible UACC-OM-SFP28-LR Datasheet
v4Complete technical specifications and product details
Ubiquiti Networks compatible UACC-OM-SFP28-LR Description
EdgeOptic's UACC-OM-SFP28-LR compatible is a Ubiquiti-coded version of the EdgeOptic 25G-SFP28-10 multi-vendor 25GBASE-LR transceiver. It carries the EEPROM identification a Ubiquiti UniFi host expects, so it drops into SFP28 slots and reports through the host management interface like the original module. One universal EdgeOptic part covers multiple vendor codes, and this listing is the Ubiquiti build of it.
Ubiquiti specifies the original UACC-OM-SFP28-LR as a multi-rate module supporting 1, 10 and 25 Gbps. The EdgeOptic compatible covers the 25G and 10G tiers: it is a 25GBASE-LR SFP28 transceiver supporting 25G Ethernet at 25.78 Gbps and 10G Ethernet at 10.31 Gbps over 10 km of single-mode fiber. The 1 Gbps mode of the original module is outside the scope of this EdgeOptic compatible. For UniFi slots that need 1G operation, confirm requirements with our sales team before ordering.
The transceiver operates at 1310 nm over duplex single-mode fiber on a Double LC/UPC connection, reaching 10 km with a 5 dB average optical path loss budget. Transmit launch power runs from a minimum of −7 dBm to a maximum of +2 dBm, receiver sensitivity is rated at −12 dBm, and the receiver tolerates an overload of +3 dBm. The host sets up the link to IEEE 802.3cc; the module does not perform forward error correction, so any FEC runs on the host side when the host enables it. Supported serial rates are 8.5 and 25.78 Gbps.
DDM/DOM is supported, giving the host live readings of transmit power, receive power, laser bias, temperature, and supply voltage for in-service monitoring. Power draw is held to 1.2 W maximum, and the module operates across the 0 to 70 °C commercial temperature range. It is built to the SFP28 MSA and SFF-8431, SFF-8432 and SFF-8472 specifications, and is CE marked, RoHS compliant, and Class 1 laser safe. Common applications include 25G uplinks between UniFi aggregation switches and single-mode site interconnect within the 10 km reach.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the UACC-OM-SFP28-LR compatible ships next business day from EU stock with a lifetime warranty. For help matching the module to a UniFi switch, contact our sales team.
Frequently Asked Questions
Will a third-party UACC-OM-SFP28-LR compatible work in a Ubiquiti UniFi switch?
Ubiquiti does not impose a hardware lockout on third-party SFP modules. EdgeOptic codes the UACC-OM-SFP28-LR compatible with the identification a UniFi host expects, so it is recognized in SFP28 ports and reports its diagnostics to the host management interface. If a switch needs to read a specific EEPROM profile, contact our sales team to confirm the coding before ordering.
Does the EdgeOptic UACC-OM-SFP28-LR compatible support 1 Gbps like the original Ubiquiti module?
Ubiquiti specifies the original UACC-OM-SFP28-LR as a 1, 10 and 25 Gbps multi-rate module. The EdgeOptic compatible covers the 25G and 10G tiers as a 25GBASE-LR SFP28 transceiver. It is not a 1 Gbps part, so for a UniFi slot that specifically needs 1G operation, the EdgeOptic compatible is not the right match. Contact our sales team to confirm the correct module for a 1G application.