Ubiquiti UF-MM-1G Compatible 1000BASE-SX SFP
Ubiquiti Networks compatible UF-MM-1G - Key Features
- Compatibility: Ubiquiti Networks
- Media Type: Multi-Mode Fiber (MMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 550 m
- Average Link Budget: 7.5 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.063 Gbps - 1.25 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Ubiquiti Networks UF-MM-1G Price
In Stock - Ships Next Business DayUbiquiti Networks compatible UF-MM-1G Specifications
Form Factor | SFP |
Media Type | Multi-Mode Fiber (MMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 550 m |
Average Link Budget | 7.5 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.063 Gbps - 1.25 Gbps |
Supported Ethernet Applications | Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 1G Fiber Channel (1.0625 Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -9.5 dBm |
Maximum Transmitting Power | 3 dBm |
Receiver Sensitivity | -17 dBm |
Receiver Overload | -3 dBm |
Dispersion | 110 ps/nm ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Ubiquiti Networks compatible UF-MM-1G Datasheet
v3Complete technical specifications and product details
Ubiquiti Networks compatible UF-MM-1G Description
EdgeOptic's UF-MM-1G compatible is a Ubiquiti Networks-coded version of the EdgeOptic 1.25G-SFP-550D multi-vendor 1000BASE-SX transceiver. It runs Gigabit Ethernet at 1.25 Gbps (IEEE 802.3z) and 1G Fibre Channel SW at 1.0625 Gbps over duplex multimode fiber, with an 850nm VCSEL transmitter and a PIN photodiode receiver.
With a 7.5 dB optical budget, the module reaches 550m over OM2 multimode fiber (50/125, 500 MHz·km) and 275m over OM1 (62.5/125). It uses a duplex LC/UPC interface and supports DDM/DOM diagnostics for live monitoring of optical power, bias current, and temperature. The module operates over the commercial 0 to 70°C range, built to the INF-8074i SFP MSA, +3.3V supply, CE/RoHS, Class 1 laser safety.
UF-MM-1G is Ubiquiti's UFiber 1G multimode ordering code, intended for SFP ports on UniFi switches, UFiber, EdgeSwitch, and EdgeRouter platforms; verify your platform's transceiver table before ordering. EdgeOptic codes the EEPROM with Ubiquiti-recognized data so the module identifies correctly on Ubiquiti platforms. Ubiquiti documents support for its own branded modules and its own transceiver policy, so check that policy for your firmware. EdgeOptic ships this compatible as a single SFP module, not a 2-pack.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For ordering-code confirmation or platform questions, contact our sales team.
Frequently Asked Questions
Is the UF-MM-1G the same as the UACC-OM-MM-1G-D-2?
UF-MM-1G is Ubiquiti's earlier ordering code for its 1G multimode SFP; UACC-OM-MM-1G-D-2 is the current Ubiquiti code that replaced it. They are distinct part numbers with their own search demand, so EdgeOptic lists a separate compatible page for each. Order by the exact code your platform documentation or purchasing system specifies. If you are unsure which code applies, contact our sales team and we will help match the right part.