3FE62600AA Nokia (Alcatel-Lucent) Compatible 10G SFP+ LR Industrial, -45 to 85C

EdgeOptic's 3FE62600AA compatible is a Nokia (Alcatel-Lucent) coded version of the EdgeOptic 10G-SFP-10I multi-vendor 10GBASE-LR SFP+ transceiver. The 3FE62600AA ordering code is a Nokia (Alcatel-Lucent) 10GBASE-LR SFP+ part at 1310 nm over single-mode fiber with a 10 km reach, duplex LC connectors and DDM/DOM support. It follows IEEE 802.3ae Clause 52 with a duplex LC/UPC connector, a 10 km maximum reach and a 6 dB average link budget at 1310 nm across a 100 nm window, 1260 to 1360 nm. As an SFP+ MSA form factor module, it is hot pluggable across compliant host cages. The supported data rate range spans 1.25 to 11.32 Gbps, covering 10G Ethernet at 10.31 Gbps, Gigabit Ethernet at 1.25 Gbps, Fibre Channel at 1.0625, 2.125, 4.25, 8.5 and 10.52 Gbps, and SDH/SONET STM-64 at 9.95 Gbps. A DFB laser paired with a PIN photodiode delivers minimum TX power of -8.2 dBm, maximum TX power of -0.5 dBm, RX sensitivity of -14.5 dBm and RX overload of 0 dBm, with chromatic dispersion tolerance of 70 to 100 ps/nm. DDM/DOM diagnostics are supported for real time monitoring of temperature, voltage, bias current and optical power, useful for verifying link health after installation. EdgeOptic's module carries an industrial operating range of -45C to +85C, wider than the -40C to +85C published for the original Nokia (Alcatel-Lucent) ordering code. Compliance covers CE, Class 1 per FDA and IEC 60825-1, RoHS, SFF-8431 and the SFP MSA. The industrial temperature classification suits cabinets, outdoor enclosures and other locations without climate control. Because both ends of the link operate within the same 1310 nm window, this compatible interoperates with standard 10GBASE-LR optics on the far end, subject to matching reach and link budget.

Verify the exact target Nokia (Alcatel-Lucent) platform and line card's transceiver compatibility list before ordering, since Nokia has not published a compatibility table specific to the 3FE62600AA ordering code. The duplex LC/UPC interface pairs two single-mode fiber strands for TX and RX, consistent with standard 10GBASE-LR deployments. EdgeOptic's compatible ships with a lifetime warranty, backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. For project quantity pricing or alternative vendor coding, contact our sales team.