Nokia SFP-10G-GIG-SR Compatible 10G SFP+ SR Transceiver
NOKIA (Alcatel) compatible SFP-10G-GIG-SR - Key Features
- Compatibility: NOKIA (Alcatel)
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
NOKIA (Alcatel) SFP-10G-GIG-SR Price
NOKIA (Alcatel) compatible SFP-10G-GIG-SR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
NOKIA (Alcatel) compatible SFP-10G-GIG-SR Datasheet
v3Complete technical specifications and product details
NOKIA (Alcatel) compatible SFP-10G-GIG-SR Description
SFP-10G-GIG-SR is a Nokia (Alcatel-Lucent) part number for a 10GBASE-SR SFP+ transceiver with dual-rate capability spanning Gigabit Ethernet and 10 Gigabit Ethernet. The GIG suffix in the part number indicates the module's ability to operate at both 1.25 Gbps and 10.3125 Gbps host rates, which is useful on The operating rate is set by SR OS port configuration; the transceiver does not negotiate the rate autonomously.
Optical specs follow the IEEE 802.3ae 10GBASE-SR short-reach standard. The 850 nm VCSEL transmitter and 850 nm PIN photodiode receiver deliver a minimum 6.1 dB optical link budget, which translates to 300 m over OM3 multimode and roughly 400 m over OM4. Connector is LC/UPC duplex, and the module runs across the standard 0 °C to 70 °C commercial temperature range. DDM data per SFF-8472 is exposed through the Nokia SR OS CLI via the show port command, reporting Tx power, Rx power, laser bias, temperature, and supply voltage.
Don't confuse SFP-10G-GIG-SR with other Nokia 10G SR SKUs such as 3HE04824AA, SFP-10G-SR-2, or 3FE63264AA. These are separate part numbers used on different Nokia hardware generations (7x50 SR, 7210 SAS, ISAM access platforms) and carry their own EEPROM vendor identifiers. Installing the wrong SKU on a specific chassis can produce EEPROM mismatch warnings in SR OS, even when the physical optical interface is identical across all four modules.
EdgeOptic's compatible SFP-10G-GIG-SR is built on the 10G-SFP-300 platform, compliant with IEEE 802.3ae and SFF-8431/SFF-8432 MSA specifications. The EEPROM is programmed with Nokia-recognized vendor data, so show port x/y/z optical output identifies the module correctly and DDM thresholds feed into SAM/NSP fault monitoring. Per-link commissioning should verify Tx and Rx power margins at both ends, particularly on runs approaching the 300 m OM3 limit where small fiber or connector losses can erode the available budget. Nokia SR OS platform compatibility is verified on every unit. For complete parametric data including eye mask margins and receiver sensitivity, refer to the EdgeOptic 10G-SFP-300 generic datasheet.
Frequently Asked Questions
Does the SFP-10G-GIG-SR compatible auto-negotiate between 1G and 10G on Nokia 7210 SAS combo ports?
Yes. The EEPROM declares dual-rate capability (1.25 Gbps and 10.3125 Gbps), which SR OS reads during module insertion. On combo ports that support both speeds, the port configuration determines operating rate. The optics themselves support sustained operation at either rate without re-keying or firmware intervention.
Can SFP-10G-GIG-SR replace other Nokia 10G SR part numbers like 3HE04824AA or SFP-10G-SR-2?
Optically yes, all four SKUs implement IEEE 802.3ae 10GBASE-SR with the same 300 m OM3 reach. EEPROM vendor data differs, though, and Nokia SR OS may log part-number mismatch warnings if you install a GIG-SR where the inventory expects a 3HE04824AA. Stick to the SKU the target chassis and line card were originally qualified against for cleanest monitoring output.