Allied Telesis AT-SP10SR Compatible 10GBASE-SR SFP+
Allied Telesis compatible AT-SP10SR - Key Features
- Compatibility: Allied Telesis
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Allied Telesis AT-SP10SR Price
Allied Telesis compatible AT-SP10SR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Allied Telesis compatible AT-SP10SR Datasheet
v3Complete technical specifications and product details
Allied Telesis compatible AT-SP10SR Description
EdgeOptic's AT-SP10SR compatible is an Allied Telesis-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver. AT-SP10SR is Allied Telesis's ordering code for a 10GBASE-SR SFP+ optic targeted at AlliedWare Plus switching environments. The optic carries Allied Telesis-recognized EEPROM identification so AlliedWare Plus firmware accepts the module under the standard transceiver-acceptance policy on the switch SFP+ ports.
The module operates per IEEE 802.3ae Clause 52 10GBASE-SR at 10.3125 Gbps, 850 nm VCSEL into duplex LC, with up to 300 m on OM3 and up to 400 m on OM4 multimode fiber. TX optical launch is −5 to 0 dBm and receiver sensitivity is −11.1 dBm for a 6.1 dB optical budget. Form factor is SFP+ (SFF-8431 MSA) at 0 to 70 degrees C commercial operating range. DDM telemetry follows SFF-8472, exposing the five standard monitored parameters: temperature, supply voltage, TX bias, TX power, and RX power.
Allied Telesis lists AT-SP10SR as a hot-pluggable 10GBASE-SR SFP+ transceiver with SFF-8431 MSA compliance and the SFF-8472 digital diagnostic monitoring feature set on the product datasheet. The optic targets AlliedWare Plus switching platforms where the chassis firmware accepts the Allied Telesis vendor identification. Verify the target AlliedWare Plus chassis against the Allied Telesis transceiver compatibility documentation for the specific switch generation the optic will install into.
The EdgeOptic 10G-SFP-300 platform underpins the same physical 10GBASE-SR SFP+ optic across the multi-vendor catalog, with vendor-recognized EEPROM coding selected per OEM ordering code. Distinguish AT-SP10SR from the Allied Telesis 10GBASE-T copper variant AT-SP10T, which is a different physical-layer technology over twisted-pair cabling and is not interchangeable with the SR fiber SFP+. The 10GBASE-SR profile is the standard short-reach multimode SFP+ choice for AlliedWare Plus uplink and inter-switch connectivity within a campus or data-center fabric.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Allied Telesis AlliedWare Plus platform questions, alternative Allied Telesis transceiver coding, or volume orders, contact our sales team.
Frequently Asked Questions
Which Allied Telesis switch series accept the AT-SP10SR compatible?
AT-SP10SR is targeted at AlliedWare Plus switching platforms with 10GbE SFP+ ports. Verify the target chassis and AlliedWare Plus firmware revision against the Allied Telesis transceiver compatibility documentation for the specific switch generation the optic will install into, since transceiver-acceptance policy varies across AlliedWare Plus chassis families and firmware levels.
Does the AT-SP10SR compatible support 1G downshift on Allied Telesis switches?
1G fallback behavior at the host port is governed by the switch port configuration and AlliedWare Plus firmware revision rather than by the optic itself. SFP+ optical interfaces do not perform rate negotiation at the optical layer; the module's laser and electronics operate at the rate the host port configures. Verify the port configuration on the AlliedWare Plus chassis to confirm the rate behavior expected on the SFP+ port.