Check Point CPAC-TR-10SR-C Compatible 10GBASE-SR SFP+ Transceiver
Check Point compatible CPAC-TR-10SR-C - Key Features
- Compatibility: Check Point
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Check Point CPAC-TR-10SR-C Price
Check Point compatible CPAC-TR-10SR-C Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Check Point compatible CPAC-TR-10SR-C Datasheet
v3Complete technical specifications and product details
Check Point compatible CPAC-TR-10SR-C Description
CPAC-TR-10SR-C is the Check Point ordering code for a 10GBASE-SR SFP+ transceiver. Check Point uses this part number across its security gateway appliances that have SFP+ expansion slots, including the 6200, 6600, 6800, 15400, 15600, 23500, and 23800 series. Unlike general-purpose switch vendors, Check Point qualifies a limited set of optics per Gaia software release, so the exact SKU matters when specifying spare modules. The CPAC-TR-10SR-C replaced the earlier CPAC-TR-10SR-B revision, though both share identical optical parameters.
The module transmits at 850 nm using a VCSEL laser and receives with a PIN photodiode over multimode fiber via LC/UPC duplex connectors. IEEE 802.3ae compliance provides 300 m reach on OM3 and 400 m on OM4 at the full 10.3125 Gbps line rate. Minimum optical power budget is 6.1 dB. The chipset also supports 1.25 Gbps (GbE) and 9.95 Gbps (STM-64) where the host port allows it, with data rate determined by the host port configuration. DDM monitoring per SFF-8472 reports real-time Tx/Rx optical power, laser bias current, module temperature, and supply voltage. Operating temperature range is 0 to 70 degrees C.
Check Point security appliances reference transceiver data through Gaia SmartConsole and cpstat. EdgeOptic programs the EEPROM with Check Point-recognized vendor data, so the module identifies correctly in both diagnostic interfaces without triggering compatibility warnings. The CPAC-TR-10SR family is one of the few 10G transceiver lines Check Point lists for its appliances, as the security gateway product line carries a smaller optics catalogue than enterprise switch platforms from Cisco or Aruba. This makes part number accuracy more important during procurement, since Check Point does not publish a generic "approved transceiver" list the way networking vendors do.
Mechanical and electrical compliance follows SFF-8431 and SFF-8432. EdgeOptic validates each module for Check Point appliance compatibility before dispatch. CE and RoHS certified. The compatible CPAC-TR-10SR-C is manufactured on the same 10G-SFP-300 platform used across all EdgeOptic 10GBASE-SR modules, with only the EEPROM vendor coding specific to Check Point.
For questions about Gaia version compatibility, expansion card models, or bulk orders for Check Point deployments, contact our sales team.
Frequently Asked Questions
What is the difference between CPAC-TR-10SR-C and CPAC-TR-10SR-B?
Both are 10GBASE-SR SFP+ modules with the same optical specifications. The -C suffix is the current Check Point catalogue revision; the -B is an older revision still found in existing deployments. EdgeOptic's compatible works as a replacement for either part number.
Which Check Point appliances have SFP+ ports for the CPAC-TR-10SR-C?
SFP+ expansion slots are available on the 6200, 6600, 6800, 15400, 15600, 23500, 23800 series, and selected Maestro Hyperscale Orchestrator configurations. Confirm the exact expansion card and Gaia version in the Check Point Hardware Compatibility List (HCL) for the specific appliance.