CPAC-TR-1T-C Check Point Compatible Copper SFP

Check Point compatible CPAC-TR-1T-C - Key Features
- Compatibility: Check Point
- Media Type: Twisted Pair CAT 5 cable
- Fiber Count: CAT 5
- Connector: RJ45
- Maximum Distance: 100 m
- Supported Data Rate: 0.1 Gbps - 1 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Check Point CPAC-TR-1T-C Price
Check Point compatible CPAC-TR-1T-C Specifications
Form Factor | SFP |
Media Type | Twisted Pair CAT 5 cable |
Fiber Count | CAT 5 |
Connector | RJ45 |
Maximum Distance | 100 m |
Supported Data Rate | 0.1 Gbps - 1 Gbps |
Supported Ethernet Applications | 1000Base-T (Gigabit Ethernet copper), 100Base-T (Fast Ethernet Copper), 10BASE-T (Ethernet Copper) |
DDM/DOM | Supported |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE, RoHS, INF-8074i, SFP MSA |
Check Point compatible CPAC-TR-1T-C Datasheet
v2Complete technical specifications and product details
Check Point compatible CPAC-TR-1T-C Description
EdgeOptic's CPAC-TR-1T-C compatible is a Check Point-coded version of the EdgeOptic 1000M-SFP-T multi-vendor tri-speed copper SFP. It carries the Check Point CPAC-TR-1T-C part identity in its EEPROM, so a Check Point security appliance reads it as a recognized transceiver. For appliances that depend on copper SFP interfaces, this compatible module is the in-stock, drop-in alternative that holds the original electrical and mechanical specification.
The module is a 1000BASE-T copper SFP built to IEEE 802.3ab. It auto-negotiates across 10, 100 and 1000 Mbps, so one part covers a Gigabit appliance interface or a slower management link. Reach is 100 m over Cat 5, Cat 5e or Cat 6 unshielded twisted pair through a standard RJ45 connector, with Auto MDI/MDI-X handling straight-through and crossover cabling. Digital diagnostics monitoring is supported. The transceiver runs on a single +3.3 V supply across the commercial 0 to 70 C range and complies with the SFP MSA, INF-8074i, CE and RoHS.
CPAC-TR-1T-C fits Check Point security appliances that support SFP transceiver expansion. Appliance support depends on the model and the slot type, so verify the part against the Check Point Security Appliance Accessories Guide before deployment. The module is a like-for-like electrical and mechanical match to the original Check Point SKU, so it slots into an existing copper interface without changes to the appliance configuration.
Copper SFP modules of this class are used wherever Gigabit links run over structured copper rather than fiber. On a security gateway that means copper uplinks to an adjacent switch, server-side connections inside the same rack, and management or out-of-band links to nearby equipment. The 100 m reach over Cat 5e or Cat 6 covers most in-building runs between a rack and a wiring closet, and the RJ45 interface lets an SFP slot connect to an existing copper plant with no media converter. The module keeps CPAC-TR-1T-C ports supplied without re-specifying the interface or the cabling layout.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor networking platforms. Ships next business day from EU stock with a lifetime warranty. For volume pricing or a deployment question, contact our sales team.
Frequently Asked Questions
Which Check Point security appliances support the CPAC-TR-1T-C copper SFP?
Appliance support for the CPAC-TR-1T-C copper SFP depends on the Check Point model and its expansion slots. The Check Point Security Appliance Accessories Guide at checkpoint.com is the authoritative reference for which appliances accept this transceiver, so check it against your specific model before ordering. If you need help confirming the fit for your appliance, contact our sales team.