Cisco Meraki MA-SFP-10GB-SR Compatible 10GBASE-SR SFP+ Transceiver
Cisco compatible MA-SFP-10GB-SR - Key Features
- Compatibility: Cisco
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Cisco MA-SFP-10GB-SR Price
Cisco compatible MA-SFP-10GB-SR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Cisco compatible MA-SFP-10GB-SR Datasheet
v3Complete technical specifications and product details
Cisco compatible MA-SFP-10GB-SR Description
EdgeOptic's MA-SFP-10GB-SR compatible is a Cisco Meraki-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver. The Meraki EEPROM identifies the optic as a recognized Meraki accessory, so it presents cleanly in the Meraki Dashboard's port-status view alongside Meraki-branded modules. One universal SR hardware platform, 80+ vendor codes, including this Cisco Meraki variant for short-reach multi-mode uplinks on Meraki MS-series and MX-series with SFP+ uplinks.
Optical specifications, 10GBASE-SR class. 850 nm VCSEL transmitter, PIN photodiode receiver, multi-mode duplex LC. Reach is 300 m on OM3 and 400 m on OM4. TX output power runs −5 to 0 dBm, receiver sensitivity −11.1 dBm, receiver overload 0 dBm, link budget 6.1 dB. Multi-rate capability spans 1.25 to 11.32 Gbps, covering 10G Ethernet, Gigabit Ethernet, and adjacent FC and STM-64 rates from the same optical platform. DDM/DOM is supported, and the diagnostic data surfaces in the Meraki Dashboard's port-status pane on switches that expose SFP telemetry. Compliance: SFF-8431, SFP MSA, IEEE 802.3ae 10GBASE-SR, RoHS, IEC60825-1 Class 1 laser safety. Operating range 0 to 70°C commercial.
MA-SFP-10GB-SR is supplied for Cisco Meraki MS-series switches and MX-series security appliances with SFP+ uplinks, where the Meraki EEPROM coding lets the optic register as a recognized accessory in the Meraki Dashboard. Meraki publishes the supported chassis list per software train; verify the exact MS or MX model and current Meraki Dashboard release against the Meraki transceiver compatibility documentation before deployment, since Meraki updates the supported list across firmware releases.
Cisco Meraki gear is cloud-managed through the Meraki Dashboard and does not expose a local CLI for transceiver overrides; there is no Meraki equivalent of Cisco's service unsupported-transceiver command. Meraki recognizes optics by matching the SFP+ EEPROM vendor data against its accepted-accessories list. EdgeOptic codes the MA-SFP-10GB-SR compatible with Meraki-recognized EEPROM, so the optic registers as a Meraki accessory in the Dashboard rather than landing in the unrecognized state, and DDM telemetry surfaces in the Dashboard port view where the chassis supports it.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty included. For Meraki MS / MX model matching, bulk pricing across multi-site deployments, or compatibility verification on the current Meraki Dashboard release, contact our sales team.
Frequently Asked Questions
Will a third-party MA-SFP-10GB-SR compatible register cleanly in the Meraki Dashboard?
Meraki recognizes transceivers by matching the SFP+ EEPROM vendor data against its accepted-accessories list. Optics whose EEPROM does not match a recognized vendor entry typically land in the Dashboard's unrecognized-module state, and Meraki does not officially support third-party optics. EdgeOptic codes the MA-SFP-10GB-SR compatible with Meraki-recognized EEPROM, so the optic presents as a Meraki accessory in the Dashboard's port-status view rather than as an unrecognized module. There is no CLI workaround on Meraki gear because the platform is dashboard-managed; EEPROM coding is the only path to clean recognition. Verify against the current Meraki Dashboard release on the target chassis before bulk deployment.
Which Meraki switches and security appliances accept the MA-SFP-10GB-SR?
Cisco Meraki publishes MA-SFP-10GB-SR support across the MS-series cloud-managed switches and the MX-series security appliances that have SFP+ uplink ports. The exact chassis list moves over time as Meraki adds and retires hardware, so the most reliable check is the Meraki transceiver compatibility documentation for the deployed Dashboard software release. EdgeOptic's compatible carries Meraki-recognized EEPROM coding, so once the chassis itself accepts MA-SFP-10GB-SR per Meraki's published list, the optic registers cleanly.