Standard recommended retail price without VAT.
QDD-400G-SR8-S
QDD-400G-SR8-S Cisco Compatible 400G 100M SMF QSFP-DD module
# Key Highlights
- Type: 400GBASE-SR8 QSFP-DD
- Compatibility: Cisco Compatible
- Tx/Rx Wavelength: 850nm
- Laser: VSCEL
- Modulation: PAM4
- Fiber Type: Multi-Mode Fiber (MMF)
- Connectors: MTP/MPO-16
- Optical Budget: 1.9dB
- Max. Distance: 100m over OM5
- Data Rate: 425 Gbps
- FEC Forward Error Correction: Supported
- DDM/DOM: Supported
- Power Consumption: ≤ 10W
- Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 400G-QSFP-DD-100-CI
€167.58
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Multi-Mode Fiber (MMF) |
|---|---|
| Connectors: | MTP/MPO |
| TX Wavelength: | 850 nm. |
| RX Wavelength: | 850 nm. |
| Minimum Optical Budget: | 1.9 dB |
| Maximum Distance: | 100m |
| Supported Data Rate: | 425 Gbps |
| Supported Applications: | 400G Ethernet (412.5Gbps) |
| DDM/DOM: | Supported |
| CDR (Clock and Data Recovery) chip | Supported |
| Forward Error Correction (FEC): | Host FEC Supported |
| Transmitter Type: | VSCEL Laser |
| Tx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Average Launch Power (Min) Each Lane: | -6 dBm |
| Average Launch Power (Max) Each Lane: | 4 dBm |
| Extinction Ratio (Min): | 3 dB |
| Receiver Type: | PIN photodiode |
| Rx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Average Receiver Sensitivity (Min) Each Lane: | -7.9 dBm |
| Average Receiver Sensitivity (Max) Each Lane: | 4 dBm |
| Receiver Overload: | 5 dBm |
| Temperature Range: | Standard 0°-70°C |
| Storage Temperature: | -40° to 85°C |
| Relative Humidity: | 0 to 85% |
| Power Consumption: | ≤12W |
| Power: | +3.3V |
| Chipset: | Inphi |
| Compliance: | 400GBASE-SR8, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE |
# Product Documentation
Multi-Vendor MSA Compatible 400G-QSFP-DD-100 Datasheet
Cisco Compatible QDD-400G-SR8-S QSFP-DD Module is based on our product 400G-QSFP-DD-100. When You will order it will be encoded to be compatible with Cisco equipment and it will be labeled with part number: 400G-QSFP-DD-100-CI, where CI means Cisco Compatible. Above You can download data-sheet of our 400G-QSFP-DD-100 product.
# Product Description
QDD-400G-SR8-S is a Cisco Compatible QSFP-DD (Quad Small Form-Factor Pluggable – Double Density) Transceiver designed for operation over Multi-Mode Fiber (MMF) optical cable. On the transmission side module converts 8x 50G PAM4 (Pulse-Amplitude Modulation) electrical input channels (each 53.125Gbps) into 8x independent PAM4 optical signal with baud rate of 53.125 Gbps. Module has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 100 m distance over OM5 multi-mode fiber. However, distance is just indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. Compatible QDD-400G-SR8-S uses top quality VCSEL (Vertical Cavity Surface Emitting Laser) (850 nm) transmitter and 400Gb/s PIN photodiode receiver. QDD-400G-SR8-S compatible supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. Compatible QDD-400G-SR8-S operates in Standard 0°-70°C temperature range and has MTP/MPO-16 interface.
Cisco compatible QDD-400G-SR8-S QSFP-DD support up to 425 Gbps data rate and is designed for 400G Ethernet application. Compatible QDD-400G-SR8-S QSFP-DD Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.
To ensure compatibility we have tested compatible QDD-400G-SR8-S Transceiver in latest platforms of Cisco networking equipment, which allows us to encode transceiver EEPROM memory to be compatible and work seamlessly with Cisco platforms. Transceiver is fully compliant to QSFP-DD Multi Source Agreement (MSA), CMIS 4.0, IEEE 802.3bs 400 Gbps specification and 400GBASE-SR8, as defined in IEEE802.3cm and module breaks out to 8 x 50G-SR, as defined in IEEE 802.3cd. Transceiver is CE/RoHS certified and is compliant with product safety standards. We will be glad to know your requirements – Contact Us.
