Myricom 10G-SFP-SR Compatible 10GBASE-SR SFP+ (CSPI)
CSPI compatible 10G-SFP-SR - Key Features
- Compatibility: CSPI
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
CSPI 10G-SFP-SR Price
CSPI compatible 10G-SFP-SR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
CSPI compatible 10G-SFP-SR Datasheet
v3Complete technical specifications and product details
CSPI compatible 10G-SFP-SR Description
EdgeOptic's 10G-SFP-SR compatible is a Myricom-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver. 10G-SFP-SR is the Myricom ordering code (Myricom is a CSPI brand) for the 10GBASE-SR SFP+ optic shipped against Myricom 10-Gigabit Ethernet adapter cards and accessory listings. The optic carries Myricom vendor identification so host firmware registers the module under standard transceiver-acceptance policy.
The module operates per IEEE 802.3ae 10GBASE-SR at 10.3125 Gbps, 850 nm VCSEL into duplex LC, with up to 300 m on OM3 and up to 400 m on OM4 multimode fiber. TX optical launch is −5 to 0 dBm and receiver sensitivity is −11.1 dBm for a 6.1 dB optical budget. Form factor is SFP+ (SFF-8431 MSA); standard 0 to 70 degrees C commercial operating range.
DDM telemetry per SFF-8472 exposes the standard four monitored parameters (temperature, supply voltage, TX bias, RX power); telemetry is accessible through the host driver's standard transceiver-diagnostic interface. Verify the target Myricom adapter or CSPI platform against the CSPI/Myricom accessories documentation before ordering for a new deployment.
Myricom 10-Gigabit Ethernet adapters and CSPI networking products span multiple generations of host-bus-adapter and platform hardware. Optic acceptance depends on the specific adapter or platform firmware, so the 10G-SFP-SR ordering code from Myricom should be matched against the chassis or adapter transceiver compatibility documentation for the target device. The optic supports IEEE 802.3ae 10GBASE-SR profile across the host SFP+ cage, with the same 10.3125 Gbps line rate, 850 nm VCSEL transmitter, and duplex LC connector specified in the standard. SFF-8431 MSA form factor lets the module sit in any standard SFP+ cage on a compliant adapter or switch; the EdgeOptic 10G-SFP-300 multi-vendor catalog covers the same physical 10GBASE-SR SFP+ optic against 80+ vendor ordering codes.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Myricom adapter-specific questions, CSPI legacy hardware support, or volume orders, contact our sales team.
Frequently Asked Questions
Is the CSPI 10G-SFP-SR a dual-rate 1G/10G optic or fixed 10GBASE-SR?
10G-SFP-SR is the Myricom ordering code for the 10GBASE-SR SFP+ optic, operating at 10.3125 Gbps per IEEE 802.3ae. Whether a specific Myricom adapter port supports a lower-rate fallback depends on the adapter generation and driver. Verify the target Myricom 10-Gigabit Ethernet adapter against the CSPI/Myricom accessories documentation for rate-support details.
Which CSPI and Myricom platforms accept the 10G-SFP-SR?
10G-SFP-SR is listed in the CSPI/Myricom accessories portfolio as a 10GBASE-SR SFP+ optic for Myricom 10-Gigabit Ethernet adapter cards. Specific adapter generations and CSPI/Myricom platforms accept the optic on their SFP+ ports; verify the target adapter or platform against the CSPI/Myricom transceiver compatibility documentation before ordering.