Dell 407-BBPC Compatible 10GBASE-SR SFP+
Dell (Force10) compatible 407-BBPC - Key Features
- Compatibility: Dell (Force10)
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Dell (Force10) 407-BBPC Price
Dell (Force10) compatible 407-BBPC Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Dell (Force10) compatible 407-BBPC Datasheet
v3Complete technical specifications and product details
Dell (Force10) compatible 407-BBPC Description
EdgeOptic's 407-BBPC compatible is a Dell-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver. 407-BBPC is Dell's ordering code for a 10GBASE-SR SFP+ targeted at Dell PowerSwitch N-series, S-series, and Z-series chassis as a 12-pack transceiver kit. The optic carries Dell-recognized EEPROM identification so PowerSwitch firmware accepts the module under the standard transceiver-acceptance policy on the switch SFP+ ports.
The module operates per IEEE 802.3ae Clause 52 10GBASE-SR at 10.3125 Gbps, 850 nm VCSEL into duplex LC, with up to 300 m on OM3 and up to 400 m on OM4 multimode fiber. TX optical launch is −5 to 0 dBm and receiver sensitivity is −11.1 dBm for a 6.1 dB optical budget. DDM telemetry per SFF-8472 exposes the standard transceiver health parameters: temperature, supply voltage, TX bias, TX power, and RX power. Form factor is SFP+ (SFF-8431 MSA) at 0 to 70 degrees C commercial operating range.
Dell.com lists 407-BBPC as compatible with PowerSwitch N-series, S-series, and Z-series, plus the PowerConnect 8100 and X1018, X1026, X1052, X4012 platforms. The optic targets the 850 nm 10GBASE-SR profile for short-reach intra-data-center multimode fiber connectivity on Dell switch SFP+ cages. Verify the specific chassis revision against the Dell PowerSwitch transceiver compatibility documentation before bulk procurement to confirm the chassis firmware revision accepts the 407-BBPC EEPROM coding.
The EdgeOptic 10G-SFP-300 platform underpins the same physical 10GBASE-SR SFP+ optic across the multi-vendor catalog, with vendor-recognized EEPROM coding selected per OEM ordering code. For Dell PowerSwitch deployments, confirm the chassis transceiver table on the device the optic will install into, since Dell maintains separate ordering codes across PowerSwitch generations even where the optical specification is equivalent. The 10GBASE-SR profile is the standard short-reach multimode SFP+ choice for intra-data-center connectivity on the Dell switching fabric.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Dell PowerSwitch deployment questions, alternative Dell transceiver coding, or volume orders, contact our sales team.
Frequently Asked Questions
Which Dell switch platforms accept the 407-BBPC SFP+?
Dell.com lists 407-BBPC as compatible with the PowerSwitch N-series, S-series, and Z-series chassis, the PowerConnect 8100 platform, and the X1018, X1026, X1052, and X4012 switches. Confirm the specific chassis revision and firmware against the Dell PowerSwitch transceiver compatibility documentation for the device the optic will install into, since transceiver-acceptance policy varies across chassis firmware levels within each PowerSwitch family.
Does the 407-BBPC require any Dell OS10 configuration to recognize the module?
No. EdgeOptic codes the 407-BBPC compatible with Dell-recognized EEPROM identification, so OS10 registers the optic under the standard transceiver-acceptance policy without requiring an unsupported-transceiver override. The module appears in the OS10 transceiver inventory output with the 407-BBPC identifier on chassis where the firmware revision accepts the Dell vendor identification.