Emulex LPe12100-OPT Compatible 8GFC SW SFP+ HBA Optic
Emulex compatible LPe12100-OPT - Key Features
- Compatibility: Emulex
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Emulex LPe12100-OPT Price
Emulex compatible LPe12100-OPT Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Emulex compatible LPe12100-OPT Datasheet
v3Complete technical specifications and product details
Emulex compatible LPe12100-OPT Description
EdgeOptic's LPe12100-OPT compatible is an Emulex-coded version of the EdgeOptic 10G-SFP-300 multi-vendor multi-rate SFP+ transceiver, configured for 8G Fibre Channel short-wave operation in Emulex LightPulse host bus adapters. LPe12100-OPT is the Emulex certified spare-optic ordering code for the 8GFC SW SFP+ used with the LightPulse LPe12000-series Fibre Channel HBAs. The optic carries Emulex-recognized EEPROM identification so HBA firmware registers the module under the standard transceiver-acceptance policy.
The module operates per INCITS 450-2008 FC-PI-4 at 8.5 Gbps signaling, 850 nm VCSEL into duplex LC, with up to 150 m on OM3 multimode fiber per the OEM specification. The optic is multi-rate: 8.5 Gbps for 8GFC, 4.25 Gbps for 4GFC, and 2.125 Gbps for 2GFC, so the HBA negotiates to the highest common rate with the fabric switch during link bring-up. DDM telemetry per SFF-8472 exposes the standard transceiver health parameters: temperature, supply voltage, TX bias, TX power, and RX power. Form factor is SFP+ (SFF-8431 MSA) at the standard commercial operating range. FC-PI-4 is the governing Fibre Channel Physical Interface standard for 8GFC short-wave; the IEEE 802.3 Ethernet standards do not apply to this Fibre Channel HBA optic.
Typical deployment is the Emulex LightPulse LPe12000-series 8G Fibre Channel host bus adapter line, which includes the LPe12000, LPe12002, LPe12100, and other LPe12000-series HBA models. The LPe12100-OPT is the Emulex-certified replacement optic for any LPe12000-series HBA where the original SFP+ requires replacement. The product line is distinct from the OneConnect OCe10100 Ethernet converged network adapter family; LightPulse LPe is Fibre Channel, OneConnect OCe is Ethernet CNA; the two product lines carry different host-side protocol stacks and require different replacement optic ordering codes.
Emulex Corporation was acquired by Avago Technologies in 2015, and Avago Technologies subsequently acquired Broadcom Corporation in 2016; the combined entity now operates as Broadcom Inc., with the Emulex brand retained for the LightPulse and OneConnect HBA / CNA product lines. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Emulex LightPulse HBA optic refresh, LPe12000-series legacy fleet support, or bulk LPe12100-OPT inventory, contact our sales team.
Frequently Asked Questions
Is the LPe12100-OPT a Fibre Channel or Ethernet optic?
Fibre Channel. The LPe12100-OPT is the certified spare optic for the Emulex LightPulse LPe12000-series 8G Fibre Channel HBAs, not an Ethernet 10GBASE-SR module. It operates per FC-PI-4 at 8.5 / 4.25 / 2.125 Gbps multi-rate Fibre Channel, not per IEEE 802.3ae 10GBASE-SR Ethernet. The Emulex Ethernet product line is the OneConnect OCe series of converged network adapters, which uses a different replacement-optic ordering code (for example, OCe10100-OPT for the OCe10100 CNA).