Emulex OCe10100-OPT Compatible 10GBASE-SR SFP+ CNA Optic
Emulex compatible OCe10100-OPT - Key Features
- Compatibility: Emulex
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Emulex OCe10100-OPT Price
Emulex compatible OCe10100-OPT Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Emulex compatible OCe10100-OPT Datasheet
v3Complete technical specifications and product details
Emulex compatible OCe10100-OPT Description
EdgeOptic's OCe10100-OPT compatible is an Emulex-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver, configured for use with the Emulex OneConnect OCe10100 series converged network adapter. OCe10100-OPT is the Emulex spare-optic ordering code for the 10GBASE-SR SFP+ used with the OneConnect Ethernet CNAs. The optic carries Emulex-recognized EEPROM identification so adapter firmware registers the module under the standard transceiver-acceptance policy.
The module operates per IEEE 802.3ae Clause 52 10GBASE-SR at 10.3125 Gbps, 850 nm VCSEL into duplex LC, with up to 300 m on OM3 and up to 400 m on OM4 multimode fiber. TX optical launch is −5 to 0 dBm and receiver sensitivity is −11.1 dBm for a 6.1 dB optical budget. DDM telemetry per SFF-8472 exposes the standard transceiver health parameters: temperature, supply voltage, TX bias, TX power, and RX power. Form factor is SFP+ (SFF-8431 MSA) at 0 to 70 degrees C commercial operating range.
Typical deployment is the Emulex OneConnect OCe10100 and OCe10102 converged network adapter line; verify OCe11100 and later OneConnect generations against the current Broadcom/Emulex accepted-optic documentation before procurement. OneConnect adapters carry both Ethernet and FCoE traffic through the same SFP+ port: the Ethernet frames travel as standard 10GBASE-SR, and the FCoE encapsulation is offloaded inside the CNA silicon. The optical transceiver itself is a standard 10GBASE-SR Ethernet module; FCoE handling is a host-side CNA function, not an optical-layer function. The OneConnect OCe product line is distinct from the LightPulse LPe Fibre Channel HBA line; the LPe12100-OPT spare optic serves the FC HBA family with 8GFC Fibre Channel optics, while the OCe10100-OPT serves the OneConnect Ethernet CNA family with 10GBASE-SR Ethernet optics.
Emulex Corporation was acquired by Avago Technologies in 2015, and Avago Technologies subsequently acquired Broadcom Corporation in 2016; the combined entity now operates as Broadcom Inc., with the Emulex brand retained for the OneConnect and LightPulse product lines. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Emulex OneConnect CNA optic refresh, legacy OCe10100 fleet support, or bulk OCe10100-OPT inventory, contact our sales team.
Frequently Asked Questions
Is the OCe10100-OPT a Fibre Channel or Ethernet optic?
Ethernet (10GBASE-SR). The OCe10100-OPT is the spare optic for the Emulex OneConnect OCe10100-series converged network adapter, which carries both Ethernet and FCoE traffic through the same SFP+ port. FCoE encapsulation runs inside the CNA silicon as a host-side function; the optical transceiver itself is a standard IEEE 802.3ae 10GBASE-SR Ethernet module. The pure Fibre Channel Emulex HBA product line is the LightPulse LPe series, served by LPe12100-OPT (8GFC) and equivalent spare-optic codes.