FN-TRAN-SFP+SR Fortinet Compatible 10GBASE-SR SFP+ Transceiver
Fortinet compatible FN-TRAN-SFP+SR - Key Features
- Compatibility: Fortinet
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Guaranteed Link Budget: 6.1 dB
- Tx Wavelenght: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Fortinet FN-TRAN-SFP+SR Price
SKU:10G-SFP-300-FO
In Stock - Ships Next Business DayFortinet compatible FN-TRAN-SFP+SR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Guaranteed Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supportet Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Fortinet compatible FN-TRAN-SFP+SR Datasheet
v3Complete technical specifications and product details
Fortinet compatible FN-TRAN-SFP+SR Description
Fortinet lists the FN-TRAN-SFP+SR as a 10GBASE-SR SFP+ transceiver for FortiGate and FortiSwitch platforms. EdgeOptic's compatible replacement matches the original optical and electrical specifications and ships with Fortinet-recognized EEPROM coding for direct use in FortiGate and FortiSwitch platforms.
Operating at 850 nm with a VCSEL laser and LC/UPC duplex connectors, the module reaches 300 m on OM3 and 400 m on OM4/OM5 multimode fiber. The 6.1 dB optical budget per IEEE 802.3ae determines the maximum supported distance. Data rates span 1.25 to 10.3125 Gbps, covering both 1G and 10G Ethernet.
FortiGate firewalls may display a "third-party transceiver" log message when a compatible optic is installed. This is an informational notice only and does not affect link operation or throughput. The SFP+ interface initializes normally, and all monitoring functions (optical power, DOM alerts) remain available through FortiOS. FortiSwitch and FortiExtender platforms with SFP+ slots also accept the FN-TRAN-SFP+SR compatible module without configuration changes.
Operating temperature range is 0 to 70°C (commercial grade). The module is compliant with SFF-8431 and SFF-8432 MSA standards and carries CE/RoHS certification. Each module is tested against Fortinet-specific EEPROM requirements and optical parameters before shipping.
For questions about FN-TRAN-SFP+SR compatibility with a specific FortiGate model or deployment scenario, contact our sales team.
Frequently Asked Questions
Does the FN-TRAN-SFP+SR compatible work in FortiGate 100F and 200F without configuration changes?
Yes. FortiGate 100F and 200F accept the FN-TRAN-SFP+SR compatible module on all SFP+ ports without any CLI override or firmware change. FortiOS may log a "third-party transceiver" informational message, but this does not prevent the link from coming up or affect performance.
Will FortiGate show a warning for a third-party FN-TRAN-SFP+SR, and does it block the interface?
FortiGate logs a "This port is using a third-party transceiver" message for non-Fortinet optics. The warning is informational only. The SFP+ interface initializes, negotiates link, and passes traffic at full 10G line rate. DDM monitoring is also unaffected.
Is the FN-TRAN-SFP+SR compatible with FortiSwitch in addition to FortiGate?
Yes. The FN-TRAN-SFP+SR is listed on Fortinet datasheets for both FortiGate and FortiSwitch platforms with SFP+ slots. EdgeOptic's compatible module is coded to work across Fortinet devices, including FortiSwitch and FortiExtender.