HPE 455884-B21 Compatible 10GBASE-SR SFP+ Transceiver
HP compatible 455884-B21 - Key Features
- Compatibility: HP
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
HP 455884-B21 Price
HP compatible 455884-B21 Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
HP compatible 455884-B21 Datasheet
v3Complete technical specifications and product details
HP compatible 455884-B21 Description
EdgeOptic's 455884-B21 compatible is an HPE-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver, built for the BladeSystem c-Class 10 Gb SFP+ SR transceiver position in HPE's interconnect-module accessories line. The 455884-B21 ordering code identifies the BladeSystem option-kit packaging variant used for c3000 and c7000 enclosures with Flex-10, Flex-10/10D, and FlexFabric 10/24 interconnect modules. The 455883-B21 is a related BladeSystem SFP+ transceiver SKU in the same product family; verify each ordering code against HPE's transceiver compatibility documentation to confirm the applicable chassis and interconnect module.
Optical engine implements IEEE 802.3ae Clause 52 10GBASE-SR at 10.3125 Gbps: 850 nm VCSEL transmitter, 850 nm PIN photodiode receiver, duplex LC connector. Reach is 300 m on OM3 and 400 m on OM4 multimode fiber, with 82 m on legacy OM2 and 33 m on OM1 plant. TX optical power sits between −5 and 0 dBm; RX sensitivity is better than −11.1 dBm. SFF-8472 DDM/DOM publishes TX power, RX power, laser bias, supply voltage, and module temperature, accessible through HPE Virtual Connect Manager on c3000 and c7000 enclosures and through the standard transceiver-diagnostic commands on FlexFabric uplink switches. Built to the SFP+ MSA per SFF-8431, SFF-8472 DDM, IEC60825-1 Class 1 laser safety, RoHS, REACH, CE, and FCC compliant; commercial 0 to 70 °C operating range.
Typical deployment is c7000 enclosure uplinks from Flex-10 or FlexFabric interconnect modules to adjacent top-of-rack switches, and chassis-to-chassis aggregation runs inside a single data-centre hall over OM3 or OM4 multimode trunks. The EEPROM carries HPE vendor identification; verify the target chassis Virtual Connect firmware revision and optic acceptance policy before fleet deployment, as HPE Virtual Connect firmware may enforce optic-vendor checks that vary by revision.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For bulk fleet refresh across multiple c7000 enclosures or orders that span BladeSystem chassis and adjacent FlexFabric uplink switches, contact our sales team with the per-chassis inventory list.
Frequently Asked Questions
Which HPE BladeSystem interconnect modules accept the 455884-B21?
The 455884-B21 is positioned in HPE's BladeSystem c-Class accessories line for c3000 and c7000 enclosures with Virtual Connect Flex-10, Flex-10/10D, and FlexFabric 10/24 interconnect modules. Acceptance depends on the installed Virtual Connect firmware revision and the chassis policy for qualified third-party optics. Confirm the VC firmware on the target chassis before deployment, and verify the optic against the BladeSystem transceiver compatibility table that ships with the VC release notes.