HPE 455885-001 Compatible BladeSystem c-Class 10Gb SFP+ SR
HP compatible 455885-001 - Key Features
- Compatibility: HP
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
HP 455885-001 Price
HP compatible 455885-001 Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
HP compatible 455885-001 Datasheet
v3Complete technical specifications and product details
HP compatible 455885-001 Description
455885-001 is HPE's assembly part number for the BladeSystem c-Class 10Gb SFP+ SR transceiver. The same physical module is referenced under three HPE part numbers: 455883-B21 (option PN, used for initial orders), 455885-001 (assembly PN, printed on the module label), and 456096-001 (spare PN, used for replacement orders). All three map to the same 10GBASE-SR optic. When searching HPE support portals or procurement systems, any of these three identifiers will return the same product specification.
EdgeOptic's compatible 455885-001 transmits at 850 nm using a VCSEL laser source and receives with a PIN photodiode. Minimum optical budget: 6.1 dB. Reach is 300 m on OM3 multimode fiber, 400 m on OM4. These distances assume standard cable plant conditions with typical splice and connector losses. The module has an LC duplex interface and operates from 0°C to 70°C. DDM reports transmit/receive power, laser bias, temperature, and voltage through the host management interface.
Supported data rates span 1.25 Gbps to 10.3125 Gbps. The transceiver fits any HPE BladeSystem c-Class enclosure with 10G SFP+ mezzanine or interconnect bays, including the c7000 enclosure and Virtual Connect FlexFabric modules. ProLiant servers equipped with SFP+ network adapters (such as the 530SFP+ or 560SFP+) also accept this module. Compliant with SFF-8431/8432. CE and RoHS certified.
EEPROM is programmed with HPE-recognized vendor data, verified against current iLO and Onboard Administrator firmware. EdgeOptic tests optical output and connector integrity on every unit before shipping. For volume pricing or specific BladeSystem enclosure compatibility, contact our sales team.
Frequently Asked Questions
Which HPE part number should I order: 455883-B21, 455885-001, or 456096-001?
All three are the same 10GBASE-SR SFP+ module. 455883-B21 is the option PN for new-build orders, 455885-001 is the assembly PN found on the physical label, and 456096-001 is the spare PN for replacements. EdgeOptic's compatible version is a direct substitute for any of the three.