C8S75B HPE MSA 1Gb iSCSI Copper SFP Compatible
HP compatible C8S75B - Key Features
- Compatibility: HP
- Media Type: Twisted Pair CAT 5 cable
- Fiber Count: CAT 5
- Connector: RJ45
- Maximum Distance: 100 m
- Supported Data Rate: 0.1 Gbps - 1 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
HP C8S75B Price
HP compatible C8S75B Specifications
Form Factor | SFP |
Media Type | Twisted Pair CAT 5 cable |
Fiber Count | CAT 5 |
Connector | RJ45 |
Maximum Distance | 100 m |
Supported Data Rate | 0.1 Gbps - 1 Gbps |
Supported Ethernet Applications | 1000Base-T (Gigabit Ethernet copper), 100Base-T (Fast Ethernet Copper), 10BASE-T (Ethernet Copper) |
DDM/DOM | Supported |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE, RoHS, INF-8074i, SFP MSA |
HP compatible C8S75B Datasheet
v2Complete technical specifications and product details
HP compatible C8S75B Description
EdgeOptic's C8S75B compatible is an HPE-coded version of the EdgeOptic 1000M-SFP-T multi-vendor 10/100/1000BASE-T copper SFP transceiver. It matches the form factor, electrical interface, and reach of the original HPE part, so it drops into the same RJ45 iSCSI host ports on an MSA storage array. The C8S75B is the HPE MSA 1Gb RJ-45 iSCSI copper SFP for connecting array controllers to a 1 Gigabit Ethernet iSCSI fabric.
The module is a copper transceiver for unshielded twisted-pair cable, with up to 100 meters of reach over Cat5, Cat5e, or Cat6. The RJ45 connector accepts standard structured cabling, and the tri-speed chipset auto-negotiates 10BASE-T, 100BASE-TX, and 1000BASE-T, the Gigabit rate built to IEEE 802.3ab, with Auto MDI/MDI-X handling straight or crossover wiring. Operation falls in the commercial 0 to 70 degrees Celsius range on a single +3.3 V supply, and digital diagnostics monitoring is supported. The module follows the SFP Multi-Source Agreement and the INF-8074i specification.
EdgeOptic codes the EEPROM with HPE-recognized identity data so the module is accepted in the iSCSI host ports of HPE MSA storage controllers. It works wherever the original C8S75B is specified, with platform coverage reported for the MSA 2040 and MSA 2050 controller families. Controller firmware and SFP support can vary by MSA model and revision, so verify the module against the HPE QuickSpecs or compatibility documentation for your controller before deployment.
Typical uses are 1 Gigabit iSCSI SAN connectivity between MSA array controllers and host or switch ports, server-to-storage links inside the rack, and copper iSCSI segments on twisted-pair cabling. The RJ45 interface lets the copper SFP plug straight onto existing copper plant, so a structured Cat5e or Cat6 run of up to 100 meters needs no media converters. Each SFP is individually hot-swappable, keeping an MSA controller iSCSI port serviceable without taking the array offline.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor networking platforms, the C8S75B compatible carries CE and RoHS certification and meets the SFP Multi-Source Agreement. It ships next business day from EU stock with a lifetime warranty. For deployment questions, contact our sales team.
Frequently Asked Questions
The HPE C8S75B is sold as a 4-pack. Can I order a single transceiver?
Yes. The HPE C8S75B option kit ships as four transceivers, since the part number was set up for populating multiple MSA iSCSI ports at once. EdgeOptic supplies the C8S75B compatible as an individual module, so you order the exact quantity the deployment needs rather than a fixed pack. For a four-port MSA controller refresh, add four units to the order; for a single-port replacement, order one.