QSFP28-100G-1310nm-80km-SM-01 Huawei Compatible 100GBASE-ZR4 QSFP28 Transceiver
Huawei compatible QSFP28-100G-1310nm-80km-SM-01 - Key Features
- Compatibility: Huawei
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 80 km
- Average Link Budget: 30 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 103.125 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Huawei QSFP28-100G-1310nm-80km-SM-01 Price
In Stock - Ships Next Business DayHuawei compatible QSFP28-100G-1310nm-80km-SM-01 Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 80 km |
Average Link Budget | 30 dB |
TX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
RX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
Supported Data Rate | 103.125 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane | 2 dBm |
Average Launch Power (Max) Each Lane | 6.5 dBm |
Extinction Ratio (Min) | 6 dB |
Receiver Type | SOA+PIN |
RX Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane | -28 dBm |
Average Receiver Sensitivity (Max) Each Lane | -7 dBm |
Receiver Overload | 5.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 6.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, MSA-extended from IEEE 802.3ba LR4, 100GBASE-ZR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Huawei compatible QSFP28-100G-1310nm-80km-SM-01 Datasheet
v3Complete technical specifications and product details
Huawei compatible QSFP28-100G-1310nm-80km-SM-01 Description
EdgeOptic's QSFP28-100G-1310nm-80km-SM-01 compatible is a Huawei-coded 100GBASE-ZR4 QSFP28 rated for 80 km on G.652 single-mode fiber. Huawei lists this module under BOM code 02312NCX in their ordering system. The EdgeOptic compatible matches the original optical specs and ships with Huawei-recognised EEPROM coding, so Huawei CloudEngine and NetEngine platforms accept the optic without unsupported-module warnings.
Four LAN-WDM channels at 1295.56, 1300.05, 1304.58, and 1309.14 nm, 25.78 Gbps each lane, 103.125 Gbps aggregate over two single-mode fibers (TX and RX) on an LC duplex connector. Cooled EML transmitters, SOA + PIN photodetector array, 30 dB optical link budget on G.652 fiber. NRZ direct-detection, DOM via the standard QSFP28 I2C interface. 100GBASE-ZR4 is MSA-extended from IEEE 802.3ba LR4 to reach 80 km.
Host RS-FEC is mandatory. ZR4 closes the 80 km link with RS(528,514) per IEEE 802.3 Clause 91 running on the host MAC; the module carries no internal FEC. Both ends must have RS-FEC enabled, otherwise the link will not stabilise. On Huawei CloudEngine and NetEngine platforms RS-FEC is configurable per port; verify the FEC setting on each 100G ZR4 interface during commissioning.
Works on Huawei CloudEngine CE6800, CE8800, and CE12800 data centre switches and NetEngine 8000 series routers. Verify the installed optic against the Huawei Optical Transceiver Compatibility Guide for your specific chassis and line card before deploying. The EdgeOptic module's EEPROM carries Huawei vendor and part-number fields, so VRP CLI inventory commands list it as a Huawei optic.
100G ZR4 80 km optics serve ISP backbone aggregation, metro core links, mobile core transport, and data centre interconnect spans where 40 km LR4 is too short and coherent ZR is more module than the budget needs. The four LAN-WDM channels sit in the ITU-T O-band, outside the C-band window where EDFA amplifiers provide gain, so these modules are intended for unamplified dark fibre runs.
Operating temperature 0 to +70 °C commercial grade. DOM per SFF-8636 reports per-lane TX/RX power, temperature, Vcc, and bias current on each of the four LAN-WDM lanes. On short spans under about 15 km the receiver can saturate on the upper end of the ZR4 TX range; insert a 12 dB LC inline attenuator on the receive side. Sibling Cisco QSFP-100G-ZR4-S, Arista QSFP-100G-ZR4, Hisense LTA1319-PC1, and Edgecore ET7402-ZR4 compatibles cover the same 80 km LAN-WDM ZR4 standard with vendor-coded EEPROM for those host platforms.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For 02312NCX orders or Huawei platform compatibility questions, contact our sales team.
Frequently Asked Questions
What is the Huawei BOM code for QSFP28-100G-1310nm-80km-SM-01?
The Huawei BOM code is 02312NCX. Both designations reference the same 100G QSFP28 80 km module in Huawei's ordering system: QSFP28-100G-1310nm-80km-SM-01 is the verbose part-number string that spells out the form factor, line rate, wavelength window, reach, and fibre type, while 02312NCX is Huawei's internal supply-chain reference for the same optic. Engineers searching either string land on the same module.
How do I verify the optic is recognised on a Huawei CloudEngine switch?
Use the standard Huawei VRP transceiver inventory commands documented for your platform's release (the typical pattern is display transceiver interface [type/number] verbose on CloudEngine and NetEngine VRP). The EdgeOptic module's EEPROM carries Huawei vendor and part-number fields, so the CLI output lists it as a Huawei optic and the platform does not flag it as unsupported. Verify the exact command syntax against the current Huawei VRP configuration guide for your release.