Huawei CFP-100G-ER4 (02310YTE) compatible CFP module Price & Datasheet
Huawei compatible CFP-100G-ER4 - Key Features
- Compatibility: Huawei
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 40 km
- Guaranteed Link Budget: 18 dB
- Tx Wavelenght: 1310 nm
- Supported Data Rate: 112 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Huawei CFP-100G-ER4 Price
SKU:100G-CFP-40-HU
Made to Order - 2 WeeksHuawei compatible CFP-100G-ER4 Specifications
Form Factor | CFP |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 40 km |
Guaranteed Link Budget | 18 dB |
TX Wavelenght | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
RX Wavelenght | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
Supported Data Rate | 112 Gbps |
Supportet Ethernet Applications | 100G Ethernet (103.125 Gbps) |
Optical Transport Network (OTN) Applications | OTU4 (112 Gbps) |
DDM/DOM | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type | DFB Laser |
Tx Wave Bandwidth | 4x LAN WDM, 13.58 nm (1295.56-1309.14 nm) |
Average Launch Power (Min) Each Lane | 2.9 dBm |
Average Launch Power (Max) Each Lane | 2.9 dBm |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 4x LAN WDM, 13.58 nm (1295.56-1309.14 nm) |
Average Receiver Sensitivity (Min) Each Lane | -20.9 dBm |
Receiver Overload | 5.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 12 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, 100GBASE-ER4, IEEE 802.3ba, SFF-8419 (CFP Power Management Interface), SFF-8636 (Management Interface for 4-lane modules) |
Huawei compatible CFP-100G-ER4 Datasheet
v3Complete technical specifications and product details
Huawei compatible CFP-100G-ER4 Description
Huawei CFP-100G-ER4 (02310YTE) Compatible is a 100GBASE-ER4 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology, each with speed of 25.78Gbps (Ethernet application) or 27.95Gbps (OTU4 application). Transceiver has minimum guaranteed optical budget of 18 dB, which in most cases is enough to reach 40 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. Compatible CFP-100G-ER4 uses cooled 4x27.95Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) laser transmitters and 4x27.95Gb/s PIN ROSA receivers. Compatible CFP-100G-ER4 (02310YTE) module converts 10 lane 11.18 Gbps electrical data streams into 4-lane LAN-WDM 27.95 Gbps optical output signal and 4-lane LAN-WDM 27.95 Gbps optical input signal into 10 lane 11.18 Gbps electrical data streams. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Module requires Single 3.3V Power Supply and has less then 9W power consumption. Module operates in Standard 0°-70°C temperature range, and has double LC connectors. More details on the technical specifications and Huawei CFP-100G-ER4 price can be seen on this page and the datasheet.
Huawei CFP-100G-ER4 (02310YTE) compatible Transceiver price and datasheet is based on our 100G-CFP-40 product, which is fully compliant with CFP Multi Source Agreement (MSA) and IEEE 802.3ba 100GBASE-ER4 standards, product safety standards and is CE/RoHS certified. We perform compatibility tests for CFP-100G-ER4 (02310YTE) Huawei compatible Transceiver with the most recent Huawei networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Huawei platforms! Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on our products. Feel free to Contact us - We will be glad to know your requirements and provide you with the appropriate solution of CFP-100G-ER4!