EX-SFP-10GE-SR (740-021308) Juniper compatible SFP+ 10G SR Duplex LC Optical Transceiver

Juniper EX-SFP-10GE-SR (Juniper SFP+ 10G SR) (740-021308) datasheet and price are based on our compatible Transceiver 10G-SFP-300-JU, which is designed to meet or exceed OEM part specifications. This transceiver is designed for Double Fiber Multi-Mode Fiber (MMF) optical cable operation. It has a minimum guaranteed optical budget of 4.6 dB, which in most cases is sufficient to reach a distance of approximately 300 meters. However, distance is merely an indicative parameter calculated for identification convenience. Eventually, we calculate distance by factoring in minimal optical budget and average attenuation of industrial optical cabling. EX-SFP-10GE-SR (740-021308) compatible transceiver employs a VSCEL Laser transmitter with a nominal wavelength of 850 nm and a PIN Photodiode receiver with the same nominal wavelength. >Juniper Networks EX-SFP-10GE-SR 10G SFP+ multimode transceivers support DDM/DOM optical diagnostics, which provide operational condition-specific diagnostic data. Compatible with Juniper 10G SFP+ multimode transceiver with Standard 0°-70°C operating temperature range and Double LC interface. SFP+ supports data rates between 1.25 and 10.31 Gbps and applications such as 10G Ethernet (10.31 Gbps), Gigabit Ethernet (1.25 Gbps), and STM-64 (9.95 Gbps). All technical specifications can be found in the datasheet for Juniper SFP+ 10G SR. Juniper Networks EX-SFP-10GE-SR 10G 10G SFP+ multimode The Double Fiber optical transceiver is a multipurpose module used in a variety of networking environments today. Internet Service Provider (ISP) Fiber To The Home routing and switching equipment, Mobile operator core and backhaul SDH/SONET applications, Data Center networking for Ethernet connections and other optical links are therefore the most popular applications.

EX-SFP-10GE-SR datasheet and pricing are based on our 10G-SFP-300 product, which is fully compliant with SFP+ Multi Source Agreement (MSA) SFF-8432 standard, product safety standards, and is CE/RoHS certified. We conduct compatibility tests for Juniper compatible Transceiver with the most up-to-date Juniper networking equipment platforms, enabling us to encode transceiver EEPROM memory to be compatible with and operate flawlessly with Juniper platforms! Before delivering our products, we conduct strict quality inspections because we are committed to providing best experience. Our products are therefore subjected to optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. Feel free to Contact us - We will gladly learn about your requirements and offer you the most suitable alternative for Juniper compatible products from our portfolio