JNP-100G-AOC-10M Juniper Compatible 100G QSFP28 AOC (10m)
Juniper compatible JNP-100G-AOC-10M - Key Features
- Compatibility: Juniper
- Cable Type: Active Optical Cable (AOC)
- Cable Configuration: Point-to-Point
- Connector Type: QSFP28 to QSFP28
- Supported Data Rate: 96.97 Gbps - 112.2 Gbps
- Maximum Distance: 10 meters
- Fiber Type: OM3 (0.5-50m) | OM4 (70-100m)
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
- MTBF: 1000000 hours
Juniper JNP-100G-AOC-10M Price
In Stock - Ships Next Business DayJuniper compatible JNP-100G-AOC-10M Specifications
Cable Type | Active Optical Cable (AOC) |
Cable Configuration | Point-to-Point |
Connector Type | QSFP28 to QSFP28 |
Supported Data Rate | 96.97 Gbps - 112.2 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
Supported InfiniBand Applications | InfiniBand EDR (100 Gbps) |
Maximum Distance | 10 meters |
Media Type | Multi-Mode Fiber (MMF) |
Fiber Type | OM3 (0.5-50m) | OM4 (70-100m) |
Wavelength | 850 nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Power Consumption (Max) | 3.5 W |
MTBF | 1000000 hours |
Compliance | CE, RoHS, QSFP28 MSA, SFF-8436, SFF-8665, IEEE 802.3ba, QDR InfiniBand |
Juniper compatible JNP-100G-AOC-10M Datasheet
v3Complete technical specifications and product details
Juniper compatible JNP-100G-AOC-10M Description
EdgeOptic's JNP-100G-AOC-10M compatible is a Juniper-coded 10m version of the EdgeOptic 100G-AOC-QSFP multi-vendor 100G QSFP28 active optical cable. It provides a point-to-point QSFP28-to-QSFP28 link for 100G Ethernet, with the optical fiber pre-terminated at both ends for 10m over OM3 multimode fiber. That suits Juniper 100G data center and aggregation links where a sealed, lightweight optical run is preferred over copper or separate transceivers and patch fiber.
The cable runs at 850nm using VCSEL transmitters and PIN photodiode receivers, carrying 100G Ethernet at 103.125 Gbps. Integrated DDM/DOM reports optical power, module temperature, bias current, and supply voltage through the QSFP28 MSA (SFF-8636 and SFF-8665) management interface. It draws +3.3V at up to 3.5W and operates from 0 to 70°C. The cable advertises host-side FEC capability through its QSFP28 management interface; configure FEC on the switch port per your platform's requirements.
EdgeOptic codes the JNP-100G-AOC-10M with Juniper-recognized EEPROM so it is identified correctly on Juniper hardware. Stocked in the EU and ships the next business day. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms and a lifetime warranty.
Frequently Asked Questions
Which Juniper switches support the JNP-100G-AOC-10M?
The JNP-100G-AOC-10M works on Juniper QFX and ACX 100G QSFP28 platforms. EdgeOptic codes it with Juniper-recognized EEPROM so it is accepted without extra configuration. Confirm 100G QSFP28 AOC support for your switch in Juniper's Hardware Compatibility Tool (HCT).
Does the JNP-100G-AOC-10M break out to 4x25G SFP28?
No. The JNP-100G-AOC-10M is a straight point-to-point QSFP28-to-QSFP28 100G link. Juniper's breakout active optical cables are a different assembly. Confirm your topology before ordering, since a straight 100G AOC cannot serve a breakout application.