Juniper SFP-1GE-T (740-038291) Compatible Copper SFP Module

Juniper
SFP
1G
CAT 5
100 m
Juniper SFP-1GE-T (740-038291) Compatible SFP Module

Juniper compatible SFP-1GE-T - Key Features

  • Compatibility: Juniper
  • Media Type: Twisted Pair CAT 5 cable
  • Fiber Count: CAT 5
  • Connector: RJ45
  • Maximum Distance: 100 m
  • Supported Data Rate: 0.1 Gbps - 1 Gbps
  • DDM/DOM: Supported
  • Temperature Range: Standard 0°-70°C

Juniper SFP-1GE-T Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
11.63
Choice of 0+
Telecoms & Integrators Globally

Juniper compatible SFP-1GE-T Specifications

Form Factor
SFP
Media Type
Twisted Pair CAT 5 cable
Fiber Count
CAT 5
Connector
RJ45
Maximum Distance
100 m
Supported Data Rate
0.1 Gbps - 1 Gbps
Supported Ethernet Applications
1000Base-T (Gigabit Ethernet copper), 100Base-T (Fast Ethernet Copper), 10BASE-T (Ethernet Copper)
DDM/DOM
Supported
Temperature Range
Standard 0°-70°C
Power
+3.3V single power supply
Compliance
CE, RoHS, INF-8074i, SFP MSA

Juniper compatible SFP-1GE-T Datasheet

v2

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Juniper compatible SFP-1GE-T Description

EdgeOptic's SFP-1GE-T compatible is a Juniper-coded RJ45 copper version of the EdgeOptic 1000M-SFP-T multi-vendor 10/100/1000BASE-T copper SFP transceiver. It replaces the Juniper SFP-1GE-T, ordering code 740-038291, a 1000BASE-T Gigabit Ethernet copper module that Juniper's Hardware Compatibility Tool classifies as a GE SFP plug-in for use in M-series and MX-series routers.

The module carries Gigabit Ethernet over copper to IEEE 802.3ab (1000BASE-T) through a standard RJ45 connector, with a reach of 100 m over Cat 5e or Cat 6 unshielded twisted pair. It runs from a +3.3 V supply across the commercial 0 to 70 C range, which matches the operating class of the Juniper original. As an EdgeOptic 1000M-SFP-T variant, the compatible auto-negotiates 10/100/1000 Mbps, so it also links at 10BASE-T and 100BASE-TX rates.

EdgeOptic codes the transceiver EEPROM with Juniper-recognized identification so the host accepts it as a genuine 740-038291 part. The bare SFP-1GE-T ordering code is the variant intended for M-series and MX-series routers. Juniper also publishes platform-prefixed ordering codes for the same copper SFP hardware class: EX-SFP-1GE-T for EX-series switches, QFX-SFP-1GE-T for QFX-series switches, and SRX-SFP-1GE-T for SRX-series security appliances. Each prefix targets a specific Juniper product family, so confirm the ordering code against the chassis transceiver table before deployment.

Copper SFP modules of this class are common in enterprise LAN aggregation, service-provider edge handoffs, and data center management links where structured copper cabling is already in place. The RJ45 interface lets a router or switch port that would otherwise need a fiber run connect directly over Cat 5e or Cat 6, which simplifies short interconnects between equipment in the same rack or room.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor networking platforms, this module is CE and RoHS certified and built to the SFP Multi-Source Agreement. It ships next business day from EU stock with a lifetime warranty. For deployment questions or volume pricing, contact our sales team.

Frequently Asked Questions

When do I need EX-SFP-1GE-T, QFX-SFP-1GE-T, or SRX-SFP-1GE-T instead of SFP-1GE-T?

The bare SFP-1GE-T ordering code (740-038291) is the variant for M-series and MX-series routers. Juniper publishes platform-prefixed ordering codes for the same copper SFP hardware class for other product lines: EX-SFP-1GE-T for EX-series switches, QFX-SFP-1GE-T for QFX-series switches, and SRX-SFP-1GE-T for SRX-series security appliances. The differences are in the ordering code and platform qualification rather than the optical interface, so match the prefix to the target Juniper family and confirm against the chassis transceiver table.

Does the SFP-1GE-T support 10M and 100M speeds or only 1000M?

Juniper classifies the original SFP-1GE-T (740-038291) as a 1000BASE-T Gigabit Ethernet module. EdgeOptic's compatible is built on the 1000M-SFP-T copper SFP, which auto-negotiates 10/100/1000 Mbps, so it links at 10BASE-T and 100BASE-TX in addition to 1000BASE-T. Whether a given speed is usable still depends on the host port and its software configuration, so verify the port settings on the Juniper platform when a sub-Gigabit link is required.