SFPP-10G-SR-ET-C Juniper Compatible 10GBASE-SR SFP+ Extended Temp
Juniper compatible SFPP-10G-SR-ET-C - Key Features
- Compatibility: Juniper
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Juniper SFPP-10G-SR-ET-C Price
Juniper compatible SFPP-10G-SR-ET-C Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Juniper compatible SFPP-10G-SR-ET-C Datasheet
v3Complete technical specifications and product details
Juniper compatible SFPP-10G-SR-ET-C Description
EdgeOptic's SFPP-10G-SR-ET-C compatible is a Juniper-coded extended-temperature 10GBASE-SR version of the EdgeOptic 10G-SFP-300 multi-vendor SFP+ transceiver. The 'ET-C' designation marks this as the Common Optic variant rated for extended operating temperature beyond the standard commercial 0 to 70°C envelope, qualifying the module for industrial-temperature deployments, outdoor cabinets, and other environments where the standard-temperature SFPP-10G-SR-C would be out of its rated range.
The optical layer matches the EdgeOptic 10G-SFP-300 baseline. The module is built to IEEE 802.3ae Clause 52 at 10.3125 Gbps over duplex multimode fiber. 850 nm VCSEL transmitter, PIN photodiode receiver, transmit power −5 to 0 dBm, receive sensitivity −11.1 dBm, average link budget 6.1 dB. Reach is 300 m over OM3 multimode fiber and 400 m over OM4 with a duplex LC connector. The optic is Juniper-coded so EX-series, QFX-series, MX-series, and ACX-series chassis accept it without third-party-transceiver flags. The extended-temperature lower bound is platform and variant specific. Verify the exact rated range against the Juniper Hardware Compatibility Tool before deployment in industrial environments.
The SFPP-10G-SR-ET-C is the right SKU when the deployment site exceeds the standard commercial temperature envelope used by the SFPP-10G-SR-C Common Optic. For typical data center and office deployments at controlled room temperature, the standard-temperature SFPP-10G-SR-C is the cost-aligned choice. Verify the chassis model, line card revision, and Junos software release against the Juniper Hardware Compatibility Tool, particularly for QFX5100 access switches, EX4300 aggregation, MX-series edge routers, and ACX-series carrier-Ethernet platforms where ET-C optic support depends on the specific platform combination and the running Junos release. Form factor is SFP+ per SFF-8431, hot-pluggable, with SFF-8472 digital diagnostics monitoring.
For Juniper extended-temperature optical bill-of-materials questions or industrial-deployment guidance, contact our sales team with the chassis model and Junos release on hand.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty.
Frequently Asked Questions
What is the operating temperature range for the SFPP-10G-SR-ET-C and how does it differ from the standard SFPP-10G-SR-C?
SFPP-10G-SR-ET-C is the Extended Temperature variant of the Juniper Common Optic for 10GBASE-SR, intended for industrial and outdoor-cabinet deployments where ambient temperature exceeds the standard commercial 0 to 70°C envelope of the SFPP-10G-SR-C. The exact rated temperature window for the Extended Temperature variant is platform-specific. Verify the rated range against the Juniper Hardware Compatibility Tool for the specific EX, QFX, MX, or ACX chassis you are deploying into, since secondary-source listings disagree on the lower bound.