Juniper SRX-SFP-1GE-T Compatible 1000BASE-T Copper SFP

Juniper
SFP
1G
CAT 5
100 m
Juniper SRX-SFP-1GE-T Compatible SFP Module

Juniper compatible SRX-SFP-1GE-T - Key Features

  • Compatibility: Juniper
  • Media Type: Twisted Pair CAT 5 cable
  • Fiber Count: CAT 5
  • Connector: RJ45
  • Maximum Distance: 100 m
  • Supported Data Rate: 0.1 Gbps - 1 Gbps
  • DDM/DOM: Supported
  • Temperature Range: Standard 0°-70°C

Juniper SRX-SFP-1GE-T Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
11.63
Choice of 0+
Telecoms & Integrators Globally

Juniper compatible SRX-SFP-1GE-T Specifications

Form Factor
SFP
Media Type
Twisted Pair CAT 5 cable
Fiber Count
CAT 5
Connector
RJ45
Maximum Distance
100 m
Supported Data Rate
0.1 Gbps - 1 Gbps
Supported Ethernet Applications
1000Base-T (Gigabit Ethernet copper), 100Base-T (Fast Ethernet Copper), 10BASE-T (Ethernet Copper)
DDM/DOM
Supported
Temperature Range
Standard 0°-70°C
Power
+3.3V single power supply
Compliance
CE, RoHS, INF-8074i, SFP MSA

Juniper compatible SRX-SFP-1GE-T Datasheet

v2

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Juniper compatible SRX-SFP-1GE-T Description

EdgeOptic's SRX-SFP-1GE-T compatible is a Juniper-coded version of the EdgeOptic 1000M-SFP-T multi-vendor 10/100/1000BASE-T copper SFP transceiver. It carries the SRX-platform part identity (Juniper 740-013111), so a Juniper SRX services gateway reads it the same way it reads a factory module. The SRX- prefix marks this as the SRX-platform ordering code; it is a copper twisted-pair module, not a fiber optic part.

The transceiver runs over unshielded twisted-pair cable, with up to 100 m of reach on Cat 5, Cat 5e, or Cat 6. The RJ45 connector accepts standard structured cabling, and the tri-speed chipset auto-negotiates 10BASE-T, 100BASE-TX, and 1000BASE-T, the Gigabit rate built to IEEE 802.3ab, with Auto MDI/MDI-X handling straight or crossover wiring. Operation falls in the commercial 0 to 70 degrees Celsius range on a single +3.3 V supply. The build follows the SFP Multi-Source Agreement and the INF-8074i specification.

Works on Juniper SRX Series firewalls and services gateways wherever the original SRX-SFP-1GE-T is specified for copper Gigabit access. The SRX-SFP-1GE-T is the commercial 0 to 70 degrees Celsius ordering code in the SRX copper SFP line. The SRX-SFP-1GE-T-ET (Juniper part 740-027085) is a separate extended-temperature variant rated for negative 40 to 85 degrees Celsius and ships under its own ordering code. The two share the same form factor and reach, but only the -ET part is qualified for industrial or outdoor environments.

EdgeOptic codes the EEPROM with Juniper-recognized identity data so the module is accepted on SRX services gateways with standard SFP host ports. Supported SFP transceiver lists vary by SRX model and Junos release, so verify the part against the chassis transceiver table in the Juniper Hardware Compatibility Tool and the Junos release notes for the gateway and software version in use.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor networking platforms, the SRX-SFP-1GE-T compatible carries CE and RoHS marking and meets the SFP Multi-Source Agreement and INF-8074i. It ships next business day from EU stock with a lifetime warranty. For deployment questions, contact our sales team.

Frequently Asked Questions

What is the difference between SRX-SFP-1GE-T and SRX-SFP-1GE-T-ET?

The SRX-SFP-1GE-T (Juniper part 740-013111) is the commercial-temperature ordering code, rated for 0 to 70 degrees Celsius. The SRX-SFP-1GE-T-ET (Juniper part 740-027085) is a separate extended-temperature variant rated for negative 40 to 85 degrees Celsius for industrial or outdoor environments. The two share the same form factor, RJ45 connector, and 100 m reach over Cat 5, Cat 5e, or Cat 6, but the temperature class and ordering code are different. Order against the exact part number specified in the chassis transceiver table to avoid a mismatch between the two.