Netgear AXM764 Compatible 10G SFP+ SR Transceiver
Netgear compatible AXM764 - Key Features
- Compatibility: Netgear
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Guaranteed Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Netgear AXM764 Price
SKU:10G-SFP-300-MS
In Stock - Ships Next Business DayNetgear compatible AXM764 Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Guaranteed Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supportet Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Netgear compatible AXM764 Datasheet
v3Complete technical specifications and product details
Netgear compatible AXM764 Description
AXM764 is Netgear's current-generation 10GBASE-SR SFP+ transceiver for the ProSAFE managed switch line, with the full ordering part number AXM764-10000S. Netgear also lists the AXM761 (AXM761-10000S) as a 10GBASE-SR SFP+ module from an earlier product cycle. Both share identical 10GBASE-SR optical specifications, but AXM764 is the updated listing that carries firmware acceptance on the newer M4300 and M4500 series platforms, while the older AXM761 remains valid on M5300, M7100, and M7300 switches from the previous ProSAFE generation. When ordering replacement optics for a mixed Netgear environment, verify the correct part number against the specific chassis model compatibility matrix, as EEPROM qualification differs between switch generations, but quoting the AXM764 aligns with Netgear's current price list and product support documentation.
EdgeOptic's compatible AXM764 matches the original 10GBASE-SR parameters: 850 nm VCSEL transmitter, LC duplex connector, minimum 6.1 dB link budget, 300 m reach on OM3 multimode fiber or 400 m on OM4 and above. The module conforms to IEEE 802.3ae 10GBASE-SR and the SFF-8431/8432 SFP+ MSA. Data rates range from 1.25 to 10.3125 Gbps, supporting both Gigabit Ethernet and 10 Gigabit Ethernet in dual-rate configuration. DDM (Digital Diagnostic Monitoring) provides real-time readouts of TX optical power, RX optical power, laser bias current, module temperature, and supply voltage. Commercial operating temperature is 0 to 70 °C.
Netgear ProSAFE switches read transceiver EEPROM data at link-up and display vendor identification, serial number, and DDM readings in the management GUI (System > Monitoring > Pluggable Modules) and through the CLI. EdgeOptic programs Netgear-compatible EEPROM identifiers into each AXM764 unit, so the switch accepts the module without diagnostic warnings or port restrictions. DDM optical power levels and temperature thresholds appear alongside link status in the switch's monitoring interface, matching the behavior of original Netgear optics. TX and RX power, laser bias current, temperature, and supply voltage are all reported at the same precision and in the same units as the original AXM764. The M4300 series supports up to 24 SFP+ ports per switch, so consistent module identification across all ports simplifies inventory and spare-parts management.
CE/RoHS certified and compliant with the SFF-8432 MSA standard. EdgeOptic tests each AXM764 unit against current ProSAFE M4300 firmware during production. For questions about AXM764 vs AXM761 interchangeability or specific M-series platform support, contact our sales team.
Frequently Asked Questions
What is the difference between Netgear AXM764 and AXM761?
Both are 10GBASE-SR SFP+ transceivers with identical optical parameters (850 nm, 300 m OM3, 6.1 dB budget). AXM764 (AXM764-10000S) is the current-generation part number qualified for ProSAFE M4300 and M4500 series switches. AXM761 (AXM761-10000S) is the predecessor, originally listed for M5300, M7100, and M7300 platforms. Either module functions in SFP+ ports across both platform generations.
Which Netgear switches have SFP+ ports for the AXM764?
Netgear ProSAFE M4300-8X8F, M4300-12X12F, M4300-24X24F, and M4500 series all include SFP+ ports that accept the AXM764. Older models such as the XSM7224S and XS748T also have SFP+ uplink slots. Check the specific model's datasheet for exact port count and slot configuration.