Palo Alto Networks PAN-T-S-PLUS-SR Compatible 10GBASE-SR SFP+

EdgeOptic's PAN-T-S-PLUS-SR compatible is a Palo Alto Networks-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver. The Palo Alto EEPROM identifies the optic as a recognized firewall accessory, so PAN-OS accepts the module on the SFP+ port without flagging it as unsupported. One universal SR hardware platform, 80+ vendor codes, including this Palo Alto Networks variant for short-reach multi-mode datacenter and aggregation-edge firewall links.

Optical specifications, 10GBASE-SR class. 850 nm VCSEL transmitter, PIN photodiode receiver, multi-mode duplex LC. Reach is 300 m on OM3 and 400 m on OM4. TX output power runs −5 to 0 dBm, receiver sensitivity −11.1 dBm, receiver overload 0 dBm, link budget 6.1 dB. Multi-rate scope spans 1.25 to 11.32 Gbps, covering 10G Ethernet, Gigabit Ethernet, 1G to 10G Fibre Channel, and STM-64. DDM/DOM is supported, accessible through PAN-OS management interfaces. Compliance: SFF-8431, SFP MSA, IEEE 802.3ae, RoHS, IEC60825-1 Class 1 laser safety. Operating range 0 to 70°C commercial.

PAN-T-S-PLUS-SR is the Palo Alto Networks part number for one of the 10GBASE-SR SFP+ accessory line items in the PA firewall portfolio. Palo Alto publishes a transceiver compatibility matrix that ties each accessory part number to specific PA model families and SFP+ port positions. EdgeOptic's compatible matches the EEPROM PAN-OS recognizes, so the optic registers cleanly during port-up. Verify the exact PA model and PAN-OS release against Palo Alto's transceiver compatibility matrix at quote stage, since SFP+ accessory support varies by PA chassis and PAN-OS version.

Palo Alto Networks publishes multiple 10G SR SFP+ accessory part numbers in the PAN-prefixed naming family, including PAN-T-S-PLUS-SR (this page) and PAN-SFP-PLUS-SR. Different suffixes tie to different line items in Palo Alto's accessory catalogue and may map to specific PA model series. Check which part number is specified on your purchase order or Palo Alto support quote, and verify against the Palo Alto transceiver compatibility matrix that the part number is the one your PA model expects. Ordering the wrong PAN- suffix can cause an unsupported-module flag on PAN-OS.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty included. For PA model-specific verification, PAN-OS release alignment, or sibling part-number cross-reference between PAN-T-S-PLUS-SR and PAN-SFP-PLUS-SR, contact our sales team.