100-00348 Sandvine Compatible 10GBASE-SR SFP+ for PTS Appliances

EdgeOptic's 100-00348 compatible is a Sandvine-coded 10GBASE-SR SFP+ for Sandvine Policy Traffic Switch appliances, used as inline traffic-classification and DPI platforms across tier-1 service-provider networks. The 10G SFP+ ports sit on the inline service cards that carry real-time subscriber traffic through the appliance for classification, shaping and QoE measurement, and the platform expects a Sandvine-identified optic to avoid vendor-mismatch entries in the appliance event log. Third-party optics typically link up but log a vendor-mismatch warning at port bring-up; the vendor-coded part avoids that entry.

Electrically the module is a full 10GBASE-SR part per IEEE 802.3ae Clause 52, 10.3125 Gbps line rate, 850 nm VCSEL transmitter, 850 nm PIN photodiode receiver, and a 6.1 dB link budget that covers 300 m OM3 and 400 m OM4 multimode fiber on a duplex LC interface. OM2 is capped at roughly 82 m and is only used where a legacy multimode plant has not been refreshed. Mechanical envelope is the SFP+ MSA (SFF-8432) with SFF-8472 digital diagnostics for TX power, RX power, laser bias current, supply voltage and case temperature telemetry over the standard I2C interface. The diagnostic page is visible through the Sandvine appliance management interface on the inline service card, which keeps the compatible module under the same health-monitoring path as a factory Sandvine optic.

EdgeOptic programs the EEPROM with Sandvine vendor identifiers so PTS appliance firmware registers the part as a native Sandvine 100-00348 and the event log does not flag a vendor mismatch at port-up. Typical deployment covers tier-1 ISP traffic classification on the PTS inline path, bandwidth-management and QoE enforcement on broadband subscriber aggregation, and DPI-based traffic shaping on regional aggregation nodes. The module operates across 0 to 70 degrees Celsius (commercial), conforms to the SFP+ MSA, and is CE/RoHS certified. For large-scale ISP deployments that run a mixed PTS appliance fleet, spare-pool sizing against active inline service cards, or bulk quotes on fleet-refresh projects, please contact our sales team.