Supermicro AOC-E10GSFPSR Compatible 10G/1G Dual-Rate SFP+
Supermicro compatible AOC-E10GSFPSR - Key Features
- Compatibility: Supermicro
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 400 m
- Average Link Budget: 6.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Supermicro AOC-E10GSFPSR Price
Supermicro compatible AOC-E10GSFPSR Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 400 m |
Average Link Budget | 6.1 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Supermicro compatible AOC-E10GSFPSR Datasheet
v3Complete technical specifications and product details
Supermicro compatible AOC-E10GSFPSR Description
EdgeOptic's AOC-E10GSFPSR compatible is a Supermicro-coded version of the EdgeOptic 10G-SFP-300 multi-vendor 10GBASE-SR SFP+ transceiver, configured as a 10G/1G dual-rate optic supporting 10GBASE-SR and 1000BASE-SX operation. AOC-E10GSFPSR is Supermicro's ordering code for the SFP+ transceiver shipped with SFP+ LAN-on-motherboard server platforms; the optic carries Supermicro vendor identification so the server's standard transceiver-acceptance policy registers the module without manual override.
The module's laser and electronics support both 10.3125 Gbps (10GBASE-SR per IEEE 802.3ae) and 1.25 Gbps (1000BASE-SX per IEEE 802.3z) operation on the same hardware interface, with rate selection governed by the host port configuration. Optical output is 850 nm VCSEL into duplex LC. TX optical launch is −6 to −1 dBm and receiver sensitivity is −11.1 dBm. Reach is up to 300 m on OM3 and up to 400 m on OM4 multimode fiber at 10G; further at 1G.
DDM telemetry follows SFF-8472, exposing temperature, supply voltage, TX bias, TX power, and RX power. The module enumerates with Supermicro-recognized EEPROM, registering in the server's standard transceiver inventory; verify against the Supermicro server's transceiver compatibility documentation for the target motherboard generation. Form factor is SFP+ (SFF-8431 MSA); commercial 0 to 70 degrees C operating range.
The AOC-E10GSFPSR is appropriate for Supermicro server motherboards and add-on cards that expose SFP+ cages with 10GBASE-SR and 1000BASE-SX operation, including data-center server deployments where the upstream switch port is provisioned at either 10G or 1G. Dual-rate hardware support lets the same physical module remain in inventory across mixed-speed deployment scenarios; the host port configuration on the Supermicro server or upstream switch governs the operational rate. For Supermicro chassis questions, mixed-NIC deployment scenarios, or alternative vendor coding for the same optical profile, the EdgeOptic 10G-SFP-300 multi-vendor catalog covers 80+ vendor codes against the same physical SFP+ optic.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For Supermicro server motherboard questions, alternative SFP+ NIC coding, or volume orders, contact our sales team.
Frequently Asked Questions
Does the AOC-E10GSFPSR work with third-party NICs in Supermicro servers?
The AOC-E10GSFPSR carries Supermicro-recognized EEPROM and is designed to register on Supermicro server platforms with SFP+ LAN-on-motherboard ports. On third-party NICs (Intel X710, Mellanox ConnectX, Broadcom NetXtreme) installed in Supermicro chassis, the NIC's own vendor identification policy determines whether the optic is accepted. Verify the target NIC's transceiver compatibility documentation before mixing Supermicro-coded optics into third-party adapter ports.