Compatible Cisco BiDi SFP selection Is an excellent approach to make the most of optical fiber resources.
Home | / |
Products | / |
Cisco | / |
BiDi Transceivers |
---|
We have matched our selection of compatible BiDi transceivers with these SKUs since Cisco BiDi SFP solutions are highly popular and because many network experts are accustomed to working with Cisco OEM component part numbers. The Wavelength Division Multiplexing (WDM) technology supports the whole spectrum of compatible Cisco BiDi SFP products that we provide. Because it utilizes different optical wavelengths for the purpose of separating transmission directions, wavelength division multiplexing, or WDM technology, makes it possible to make effective use of the optical fiber resources. Transmission and reception at WDM wavelengths are completely separate from one another. Our compatible Cisco BiDi optics portfolio includes not only Gigabit ethernet compatible Cisco BiDi SFP, but also Cisco 10G BiDi SFP+ and XFP. Both of the newcomers are Cisco 40 100G BiDi alternative compatibles. You are more than welcome to get in touch with us if you have any inquiries.
Our Cisco 40/100G BiDi Compatibles are a relatively new addition to the market. These innovative devices allow existing double-fiber multi-mode cabling to be reused for 40G or 100G connections. Although conventional SR4 40G or 100G optics employ four parallel lanes of multimode cable, these Cisco 40/100g BiDi Compatible transceivers integrate WDM technology on multimode by segregating transmission directions and using 850nm and 900nm Tx wave lengths. That reduces the number of fibers from four to two and allows the use of standard Double LC connector. Cisco 40/100g BiDi transceivers are particularly useful for upgrading data centers and other core network locations that use 40G and 100G ports.
Even now, 10G Ethernet is the most widely used standard, particularly for establishing long haul connections within the transmission network. With the help of our compatible Cisco 10G Bidi SFP + modules, you will be able to save valuable optical fiber resources by creating 10G connections with just a single single-mode fiber rather of the typical two. This is made possible using wavelength division multiplexing (WDM) technology, which utilizes different light frequencies in order to segment the transmission directions. Because the TX and RX frequencies cross at either end, BiDi 10G optical transmitters always work in pairs when they are put into operation. The Cisco 10G BiDi SFP+ OEM transceiver portfolio only includes variants with a distance of 10 kilometers; however, we have launched and are able to provide compatibility with the Cisco 10G BiDi SFP in versions with a distance of 20, 60, and 80 kms.
The XFP is an older 10G optical transceiver form-factor. Initially, SFP + was used mainly for 10G Ethernet transmission, while XFP was used for more SONET SDH/OC connections. With the development of components, SFP + modules can now do all the same things as XFP, but are able to provide higher port density. Probably because of the declining popularity of XFP, the Cisco OEM portfolio does not include BiDi XFP. Fortunately, we are able to ensure the success of our BiDi XFP products on Cisco platforms with XFP ports.
Compatible Cisco BiDi SFP optical modules have long been available on the market and helps save fiber resources for Gigabit Ethernet connectivity. They are prevalent in both corporate and ISP Ethernet-to-the-Home networks. cSFP transceivers are an interesting innovation; these transceivers increase the port density of access switches. By selecting our Compatible Cisco BiDi SFP, you’ll save money on your network investment and receive outstanding technical support.