40G-QSFP-2

Multi-Vendor MSA Compatible 40G-QSFP-2 QSFP Module

# Key Highlights
  • Type: QSFP IR4
  • Compatibility: Multi-Vendor MSA Compatible
  • Tx/Rx Wavelength: 1310 nm. / 1310 nm.
  • Media Type: Single-Mode Fiber (SMF.)
  • Optical Budget: 4.5 dB
  • Max. Distance: 2 km
  • Data Rate: 39.81-44.8 Gbps
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 40G-QSFP-2

90.09

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

TX Wavelength:

1310 nm.

RX Wavelength:

1310 nm.

Minimum Optical Budget:

4.5 dB

Maximum Distance:

2km

Supported Data Rate:

39.81 – 44.8 Gbps

Supported Applications:

40G Ethernet (41.25Gbps), STM-256 (39.81 Gbps), OTU3 (43.01Gbps), OTU3e2 (44.58Gbps)

DDM/DOM:

Supported

Temperature Range:

Standard 0°-70°C

Connectors:

Double LC

Tx Wavelength Bandwidth:

4 WDM Seperated 1310nm Lanes (13 nm (1271, 1291, 1311, 1331))

Rx Wavelength Bandwidth:

4 WDM Seperated 1310nm Lanes (13nm (1271, 1291, 1311, 1331))

Minimum Transmitting Power:

Each Lane -7 dB

Maximum Transmitting Power:

Each Lane 2.3 dB

Receiver Sensitivity:

Each Lane -11.5 dBm

Receiver Overload:

Each Lane 2.3 dBm

Transmitter Type:

DFB Laser

Receiver Type:

PIN photodiode

Chipset:

MAXIM, MINDSPEED, SEMTECH, UX

Power:

+3.3V single power supply

Compliance:

802.3ba 40GBASE-IR4, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8438i, QSFP+ MSA, RoHS, SFF-8436

# Product Documentation
# Product Description

    40G-QSFP-2 is Multi-Vendor MSA Compatible QSFP (Quad Small Form-factor Pluggable) Transceiver, operating over four parallel pairs of singlemode optical fiber providing four independent optical communication lanes separated from each other using WDM technology. Module has minimum guaranteed optical budget of 4.5 dB, which in most cases is enough to reach 2 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. For each lane 40G-QSFP-2 uses 4 x DFB transmitting lasers and 4 x PIN receivers, operating each lane with speeds of 11.2 Gbps, giving an aggregated maximum bandwidth of 44.8 Gbps. Module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 40G-QSFP-2 operates in Standard 0°-70°C temperature range and has double LC connector. 40G-QSFP-2 support 39.81 – 44.8 Gbps data rates and such applications as 40G Ethernet (41.25 Gbps), STM256 (39.81 Gbps), OTU3 (43.108 Gbps) and OTU3e2 (44.58 Gbps). 40G-QSFP-2 optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Mobile operator core and back-haul 40G applications, Data Center networking site interconnections and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 40G-QSFP-2 Transceiver is fully compliant to QSFP+ Multi Source Agreement. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide QSFP+ transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and QSFP+ transceiver EEPROM memory data validation tests.