CFP2-100G-ER4

Our Cisco CFP2-100G-ER4 compatible analogue transceiver is based on our product 100G-CFP2-40, which has the same specifications and is manufactured in accordance with the same industry standards. The Cisco CFP 100G ER4 compatible module is intended for use with Double Fiber Single-Mode Fiber (SMF) optical cable. Our compatible Cisco 100G CFP2 ER4 40km module has a minimum guaranteed optical budget of 18 dB, which is usually enough to reach up to 40 km distance as per CFP2 MSA specification. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum optical budget and the average attenuation of optical cabling in industry. Our Cisco CFP 100G ER4 Compatible module version uses a high-quality EML Laser transmitter with a nominal wavelength of 1310 nm and a 1310 nm PIN Photodiode receiver. 100G CFP2 ER4 40km compatible module supports also DDM/DOM optical diagnostics, which provides diagnostic information about the current operating conditions. For the Cisco CFP 100G ER4 digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The Cisco CFP 100G ER4 compatible module has a Double LC interface and operates in the standard 0°-70°C temperature range. This CFP2 module supports data rates ranging from 103.1 to 112 Gbps data rate and such applications as 100G Ethernet (103.125Gbps), OTU4 (112Gbps). Our CFP2-100G-ER4 Cisco compatible CFP2 ER4 40km module module is a multi-purpose module that can be used in a variety of networking applications. Consequently, most popular applications are Internet Service Provider, Fiber to The Home routing and switching equipment with Cisco CFP 100G ER4 compatible interfaces, Mobile Operator Core and Backhaul applications, Data Center networking for Ethernet connections and other optical fiber links. Our 100G CFP2 ER4 40km compatible transceiver has proven to be reliable in temperature-controlled server rooms over a long period of time. 100G CFP2 ER4 40km compatible transceivers do not require any maintenance while in use. The only possible maintenance requirement could occur during cable replacement, when the transceiver connector must be thoroughly cleaned of dust using special optical connector cleaning tools. Therefore, ensuring the best connection possible – leading to best performance!
Our Compatible Cisco CFP2-100G-ER4 price and datasheet are based on our product 100G-CFP2-40, which is CE/RoHS certified and fulfills product safety standards. We perform compatibility tests for Cisco compatible 100G-CFP2-40 Module with the most recent Cisco networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Cisco platforms. Furthermore, our optical transceivers comply with the CFP2 Multi Source Agreement industry standard SFF-8431. Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on CFP2 transceivers. Please contact us if you require any additional informationContact Us!

.