0
  • No products in the cart.
Total:€0.00

R9F98A

Aruba Compatible R9F98A QSFP+ 40G MPO eSR4 300M Module

R9F98A Aruba compatible picture
# Key Highlights
  • Type: QSFP
  • Compatibility: Aruba Compatible
  • Tx/Rx Wavelength: 850 nm. / 850 nm.
  • Media Type: 4 Paralel Lanes of Multi-Mode Fiber (MMF.)
  • Optical Budget: 2.5 dB
  • Max. Distance: 400 m (OM4)/300 m (OM3)
  • Data Rate: 39.81-44.8 Gbps
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 40G-QSFP-300V2-AU

€75.08

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

4 Lanes of MMF
TX Wavelength:

850 nm.
Transceiver Type:

QSFP
RX Wavelength:

850 nm.
Minimum Optical Budget:

2.5 dB
Maximum Distance:

400m
Supported Data Rate:

39.81 – 44.8 Gbps
Supported Applications:

40G Ethernet (41.25Gbps), STM-256 (39.81 Gbps), OTU3 (43.01Gbps), OTU3e2 (44.58Gbps)
DDM/DOM:

Supported
Temperature Range:

Standard 0°-70°C
Connectors:

MTP/MPO
Tx Wavelength Bandwidth:

20 nm (840-860 nm)
Rx Wavelength Bandwidth:

20 nm (840-860 nm)
Minimum Transmitting Power:

Each Lane -7 dB
Maximum Transmitting Power:

Each Lane 1 dBm
Receiver Sensitivity:

Each Lane -9.5 dBm
Receiver Overload:

Each Lane 2.4 dBm
Transmitter Type:

VSCEL Laser
Receiver Type:

PIN photodiode
Chipset:

MAXIM, MINDSPEED, SEMTECH, UX
Power:

+3.3V single power supply
Compliance:

802.3ba 40GBASE-SR4, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8438i, QSFP+ MSA, RoHS, SFF-8436
# Product Documentation
Multi-Vendor MSA Compatible 40G-QSFP-300 QSFP Datasheet

Aruba Compatible R9F98A QSFP Module is based on our product 40G-QSFP-300. When You will order it will be encoded to be compatible with Aruba equipment and it will be labeled with part number: 40G-QSFP-300-AU, where AU means Aruba Compatible. Above You can download datasheet of our 40G-QSFP-300 product.

# Product Description

    R9F98A is Aruba Compatible QSFP (Quad Small Form-factor Pluggable) Transceiver, operating over four parallel pairs of multimode optical fiber providing four independent optical communication lanes. It has minimum guaranteed optical budget of 2.5 dB, which in most cases is enough to reach 400 distance using OM4 type multi-mode cable or 300m distance using OM3 type cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality 4 x VCSEL transmitters which operate at nominal wavelength 850 nm and 4 x 850 nm PIN photodiode receivers. Module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. R9F98A operates in Standard 0°-70°C temperature range and has MPO 12 connector. R9F98A support 39.81 – 44.8 Gbps data rate and such applications as 40G Ethernet (41.25 Gbps), STM256 (39.81 Gbps), OTU3 (43.108 Gbps) and OTU3e2 (44.58 Gbps). R9F98A optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Mobile operator core and back-haul 40G applications, Data Center networking site interconnections and other optical links.

   Transceiver is CE/RoHS certified and it is Compliant with product safety standards. We perform compatibility tests for Aruba compatible R9F98A QSFP+ Transceiver with latest platforms of Aruba networking equipment, which allows us to encode transceiver EEPROM memory to be compatible and work seamlessly with Aruba platforms. However, our optical transceivers are compliant compliant to QSFP Multi Source Agreement (MSA) SFF-8436 industry standard. as well. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and QSFP transceiver EEPROM memory data validation tests. If you have any questions, please Contact us.