0
  • No products in the cart.
Total:€0.00

100G-SFP-DD-10

100G-SFP-DD-10
100G-SFP-DD-10
100G-SFP-DD-10
100G-SFP-DD-10

MSA Compatible 100G SFP-DD LR1 PAM4 Module

Double Fiber 100G SFP-DD LR1 PAM4 Module (Tx/Rx 2x1310nm (PAM4) 53.125 Gbps per lane/ 1x1310nm (PAM4) 106.25 Gbps per lane, Max. 10km over SMF, 4.7 dB, Temp. 0-70C, Duplex LC Connector)

€465.47

SKU: 100G-SFP-DD-10-MS
5 - Years Warranty
Risk Free Return Policy
Reliable Testing Program
Shipping:Below 1 Week in EU Countries

Similar products:

Key Technical Data
Media Type

Single-Mode Fiber (SMF)
Connectors

Double LC
TX Wavelength

1310 nm
RX Wavelength

1310 nm
Optical Budget (Min)

4.7 dB
Max Distance

10 km
Data Rate Supported

106.25 Gbps
Supported Apps

100G Ethernet
DDM/DOM

Supported
FEC (Error Correction)

Host FEC Supported
Transmitter Type

EML Laser
Tx Wave Bandwidth

13 nm
Avg Launch Power (Min)

-1.4 dBm
Avg Launch Power (Max)

4.5 dBm
Receiver Type

PIN photodiode
Rx Wave Bandwidth

13 nm
Avg Rx Sensitivity (Min)

-6.1 dBm
Avg Rx Sensitivity (Max)

4.5 dBm
Receiver Overload

4.5 dBm
Temp Range

Standard 0°-70°C
Storage Temp

-40° to 85°C
Relative Humidity

5 to 85%
Power Consumption

≤3W
Power

3.3V
Compliance

100G Lambda 100G LR1, SFP56-DD MSA, IEEE802.3CU, 100GAUI-2(no FEC), RoHS
Product Documentation

100G-SFP-DD-10 is a 100GBASE LR1 Multi-Vendor MSA Compatible SFP-DD (Small Form-Factor Pluggable – Double Density) Transceiver designed for operation over Single-Mode Fiber (SMF) optical cable. On the transmission side module converts 2x 50G PAM4 (Pulse-Amplitude Modulation) electrical input channels (each 53.125Gbps) into 1x independent 100G PAM4 (106Gbps) optical signal. Module has minimum guaranteed optical budget of 4.7 dB, which in most cases is enough to reach 10 km distance over OS2 single-mode fiber. 100G-SFP-DD-10 uses top quality EML (1310 nm) transmitter and 106.25Gb/s PAM4 PIN photodiode receiver. 100G-SFP-DD-10 100GBASE-LR1 supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. 100G-SFP-DD-10 operates in Standard 0°-70°C temperature range and has Double LC interface.

100G-SFP-DD-10 100GBASE-LR1 SFP-DD transceiver is CE/RoHS certified and is compliant to SFP56-DD Multi Source Agreement (MSA), IEEE802.3CU, 100G Lambda 100G LR1 and 100GAUI-2(no FEC). We will be glad to know your requirements!

Related Products