200G-CFP2-DCO

CFP2 DCO MSA Compatible Module: 200G-CFP2-DCO

# Key Highlights
  • Type: 100G/200G CFP2-DCO
  • Compatibility: Multi-Vendor MSA Compatible
  • Tx/Rx Wavelength: 96 Channel Tunable ITU-T 50Ghz C-Band
  • Laser: Tunable DWDM Coherent
  • Modulation: DQPSK/QPSK (100G), 16QAM (200G)
  • Fiber Type: Single-Mode Fiber (SMF)
  • Connectors: Double LC
  • Optical Budget: 18.5dB
  • Max. Distance: 2000km (100G), 1000km (200G) with EDFA
  • Data Rate: 103.125 to 210.4 Gbps
  • DDM/DOM: Supported
  • FEC Forward Error Correction: SD-FEC 25%
  • Test Function: Line & Client PRBS Generator and Checker
  • Compliance: OIF-CFP2-DCO, CFP2 MSA Hardware Specification 1.0
  • Power Consumption: ≤ 21W (100G) / 26W (200G)
  • Temperature: Standard -5° to 70°C
# Pricing & Ordering
SKU: 200G-CFP2-DCO

9,909.90

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Connectors:

Supported Data Rate:

Supported Applications:

, , ,

Modulation

,

DDM/DOM:

Test Function:

Forward Error Correction (FEC):

Minimum Optical Budget:

Maximum Distance:

Transmitter Type:

TX Wavelength:

Tx Wavelength Bandwidth:

Receiver Type:

RX Wavelength:

Rx Wavelength Bandwidth:

Average Launch Power (Min) Each Lane:

Average Launch Power (Max) Each Lane:

Optimum Input Power (Min):

Optimum Input Power (Max):

Extended Input Power (Min):

Extended Input Power (Max):

Receiver Overload:

Temperature Range:

Storage Temperature:

Relative Humidity:

Power Consumption:

Power:

Compliance:

, , , , , , ,

# Product Documentation
# Product Description

100G/200G CFP2 DCO module is dual rate (100G/200G) Coherent Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver designed for operation over Double Fiber optical cable. On the transmission side, the module converts 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input channels into one Single Lambda 100G/200G optical signal. Reversely the opposite is done on the receiving side, the module converts one Single Lambda 100G/200G optical signal into 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input signal. Module has a minimum guaranteed optical budget of 18.5 dB, which in most cases is enough to reach 80km without signal amplification, however the module can reach up to 2000km (100G) or 1000km (200G) with signal amplification. Distance is just an indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. To achieve high data rate, long haul error-free transmission Soft Decision FEC (Forward Error Correction) with 25% overhead has been implemented on this unit. 200G Coherent CFP2-DCO has advanced DSP (Digital Signal Processor) ASIC and integrated Coherent Transmitter/Receiver which helps to revolutionize the IP routing edge giving it ability to transport IP over DWDM Network (IPoDWDM). 200G Coherent CFP2-DCO Transmitter and Receivers support PM-DQPSK (polarization-multiplexed differential quadrature phase shift keying) / PM-QPSK (polarization-multiplexed quadrature phase shift keying) modulation for 100G and PM-16QAM (Polarization multiplexed 16-ary quadrature amplitude modulation) for 200G.

200G CFP2 DCO uses tunable DWDM Coherent laser transmitter (ITU-T 50Ghz C-Band 96 Channels) and tunable DWDM Coherent (ITU-T 50Ghz C-Band 96 Channels) receiver. 200G CFP2-DCO supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions and additionally the module has built-in Line & Client PRBS (pseudorandom binary sequence) generator and checker which can help to diagnose and test the link state. 200G CFP2-DCO operates in Standard -5° to 70°C temperature range and has Double LC connector facing Line side and 104-pin CFP2 MSA-compliant connector towards Host side.

200G CFP2-DCO supports 112.2 to 210.4 Gbps data rate and is designed for Telecom Metro/Long-haul, Wireless Backhaul and Hyperscale Data Center Interconnect (DCI) applications. Transceiver is CE/RoHS certified and CFP2 DCO specification is fully compliant with product safety standards and to CFP2 MSA Hardware Specification 1.0 with modifications, CFP MSA Management Interface Specification 2.6 r06a with modifications, OIF-CFP2-DCO, CEI-28G-MR specifications and OTL4.4/OTLC2 Signaling. Consequently CFP2 DCO, compliance to above standards and specifications guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for 200G CFP2-DCO transceiver in order to make it work in almost any brand of equipment. We will be glad to know your requirements – Contact Us.