Standard recommended retail price without VAT.
€1,351.35
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
Connectors: | Double LC |
TX Wavelength: | LAN WDM 1310nm |
RX Wavelength: | LAN WDM 1310nm |
Minimum Optical Budget: | 6.3 dB |
Maximum Distance: | 10km |
Supported Data Rate: | 103.125-111.81 Gbps |
Supported Applications: | 100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps) |
DDM/DOM: | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type: | DFB Laser |
Tx Wavelength Bandwidth: | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Transmit Power Per Lane (Min): | -4.3dBm |
Receiver Type: | PIN photodiode |
Rx Wavelength Bandwidth: | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane: | -10.6 dBm |
Receiver Overload: | Each Lane 4.5 dBm |
Temperature Range: | Standard 0°-70°C |
Storage Temperature: | -40° to 85°C |
Relative Humidity: | 0 to 85% |
Power Consumption: | ≤12W |
Power: | +3.3V |
Chipset: | MAXIM, MINDSPEED, SEMTECH, Sumitomo |
Compliance: | CFP MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-LR4, SFF-8419, CE, RoHS, SFF-8636 |
Adva Compatible 1061480161-01 is based on our product 100G-CFP-10 When You will order it will be encoded to be compatible with Adva equipment and it will be labeled with part number: 100G-CFP-10-AD, where AD means Adva Compatible. Above You can download the datasheet of our 100G-CFP-10.
Our Compatible Adva 1061480161-01 CFP transceiver is based on our 100G-CFP-10 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 6.3 dB, which typically is enough to reach about 10 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Adva 1061480161-01 compatible transceiver uses a high-quality DFB Laser transmitter operating at 1295.56, 1300.05, 1304.58, 1309.14 nm nominal wavelength and a 1295.56, 1300.05, 1304.58, 1309.14 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 103.125-112 Gbps and such applications as 100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.
Our compatible Adva 1061480161-01 module is CE/RoHS certified, it meets product safety standards, and is compliant with CFP Multi Source Agreement (MSA) CFP-MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Adva networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Adva platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.