Standard recommended retail price without VAT.
€188.27
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
TX Wavelength: | 1550 nm |
RX Wavelength: | 1490 nm. |
Minimum Optical Budget: | 23 dB |
Maximum Distance: | 80km |
Supported Data Rate: | 1.25-10.31 Gbps |
Supported Applications: | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps) |
DDM/DOM: | Support |
Temperature Range: | Standard 0°-70°C |
Connectors: | Single LC |
Tx Wavelength Bandwidth: | 40 nm (1530-1570 nm) |
Rx Wavelength Bandwidth: | 40 nm (1470-1510 nm) |
Minimum Transmitting Power: | 0 dB |
Maximum Transmitting Power: | 7 dB |
Receiver Sensitivity: | -23 dBm |
Receiver Overload: | -7 dBm |
Dispersion: | 1600 ps/nm |
Transmitter Type: | EML Laser |
Receiver Type: | APD Photodiode |
Power: | +3.3V single power supply |
Chipset: | MAXIM, MINDSPEED, SEMTECH |
Compliance: | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Allied Telesis Compatible AT-SP10BD80/I-15 is based on our product BIDI-10G-SFP-80B. When You will order it will be encoded to be compatible with Allied Telesis equipment and it will be labeled with part number: BIDI-10G-SFP-80B-AT, where AT means Allied Telesis Compatible. Above You can download the datasheet of our BIDI-10G-SFP-80B.
Our Compatible Allied Telesis AT-SP10BD80/I-15 SFP+ transceiver is based on our BIDI-10G-SFP-80B product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Single Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 23 dB, which typically is enough to reach about 80 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Allied Telesis AT-SP10BD80/I-15 compatible transceiver uses a high-quality EML Laser transmitter operating at 1550 nm nominal wavelength and a 1490 nm APD Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Single LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 1.25-10.31 Gbps and such applications as 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Fiber to the Home Aggregation and Backbone, Mobile Operator Core Networks and Mobile Backhaul and Data Center networking site interconnections are the most popular applications for this product.
Our compatible Allied Telesis AT-SP10BD80/I-15 module is CE/RoHS certified, it meets product safety standards, and is compliant with SFP+ Multi Source Agreement (MSA) SFF-8432 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Allied Telesis networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Allied Telesis platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.