AFCT-89SDDZ

AFCT-89SDDZ Avago Compatible 100G QSFP28 500M Transceiver

# Key Highlights
  • Type:100G-DR Single Lambda PAM4 QSFP28
  • Compatibility:Avago Compatible
  • Tx/Rx Wavelength:1304.5- 1317.5 nm
  • Laser:EML TOSA
  • Fiber Type:Single-Mode Fiber (SMF)
  • Connectors:Double LC
  • Optical Budget:3dB
  • Max. Distance:500m
  • Optical Data Rate / Baud Rate:53.125 Gbps
  • Modulation format:PAM4
  • Data Rate:106.25 Gbps
  • FEC Forward Error Correction:Supported
  • DDM/DOM:Supported
  • Power Consumption:≤4.5W
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 100G-QSFP28-SL500-AG

157.66

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

Connectors:

Double LC

TX Wavelength:

1310 nm

RX Wavelength:

1310 nm.

Minimum Optical Budget:

3 dB

Maximum Distance:

500m

Supported Data Rate:

106.25 Gbps

Supported Applications:

100G Ethernet (103.125Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

EML TOSA

Tx Wavelength Bandwidth:

1304.5- 1317.5 nm

Average Launch Power (Min) Each Lane:

-2.4 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

5 dB

Receiver Type:

PIN ROSA

Rx Wavelength Bandwidth:

1304.5- 1317.5 nm

Average Receiver Sensitivity (Min) Each Lane:

-5.4 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

6.5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤4.5W

Power:

+3.3V

Chipset:

Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV

Compliance:

100G Lambda MSA, Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE802.3cd 100GBASE-DR, RoHS-6, CE, QSFP28 MSA, SFF-8636, SFF-8665

Transceiver Type:

QSFP28

# Product Documentation
Multi-Vendor MSA Compatible 100G-QSFP28-SL500 QSFP28 Datasheet

Avago Compatible AFCT-89SDDZ QSFP28 Module is based on our product 100G-QSFP28-SL500. When You will order it will be encoded with Avago code and it will be labeled with part number: 100G-QSFP28-SL500-AG, where AG means Avago Compatible. Above You can download data-sheet of our 100G-QSFP28-SL500 product.

# Product Description

Our Compatible Avago AFCT-89SDDZ QSFP28 transceiver is based on our 100G-QSFP28-SL500 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 3 dB, which typically is enough to reach about 500 m. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Avago AFCT-89SDDZ compatible transceiver uses a high-quality EML Laser transmitter operating at 1304.5-1317.5nm nominal wavelength and a 1304.5-1317.5nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 106.25 Gbps and such applications as 100G Ethernet (103.125Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Fiber to the Home Aggregation and Backbone, Mobile Operator Core Networks and Mobile Backhaul and Data Center networking site interconnections are the most popular applications for this product.

Our compatible Avago AFCT-89SDDZ module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665, IEEE802.3cd 100GBASE-DR and 100G Lambda MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Avago networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Avago platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.