Standard recommended retail price without VAT.
€202.70
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Multi-Mode Fiber (MMF) |
---|---|
Connectors: | Double LC |
TX Wavelength: | 850/ 880/ 910/ 940nm |
RX Wavelength: | 850/ 880/ 910/ 940nm |
Minimum Optical Budget: | 3 dB |
Maximum Distance: | 150m |
Supported Data Rate: | 103.125 Gbps |
Supported Applications: | 100G Ethernet (103.125Gbps) |
DDM/DOM: | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Forward Error Correction (FEC): | Host FEC Supported |
Transmitter Type: | 4xVCSEL |
Tx Wavelength Bandwidth: | 850-940 nm |
Average Launch Power (Min) Each Lane: | -7.5 dBm |
Average Launch Power (Max) Each Lane: | 3 dBm |
Extinction Ratio (Min): | 2 dB |
Receiver Type: | PIN photodiode |
Rx Wavelength Bandwidth: | 850-940 nm |
Average Receiver Sensitivity (Min) Each Lane: | -9.4 dBm |
Receiver Overload: | Each Lane 3.4 dBm |
Temperature Range: | Standard 0°-70°C |
Storage Temperature: | -40° to 85°C |
Relative Humidity: | 0 to 85% |
Power Consumption: | ≤3.5W |
Power: | +3.3V |
Compliance: | IEEE802.3bm CAUI-4, SWDM MSA, CE, QSFP28 MSA, RoHS, SFF-8636 |
Check Point Compatible CPAC-TR-100SWDM4 is based on our product SWDM4-100G-QSFP28-150. When You will order it will be encoded to be compatible with Check Point equipment and it will be labeled with part number: SWDM4-100G-QSFP28-150-CP, where CP means Check Point Compatible. Above You can download the datasheet of our SWDM4-100G-QSFP28-150.
Our Compatible Check Point CPAC-TR-100SWDM4 QSFP28 transceiver is based on our SWDM4-100G-QSFP28-150 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 3 dB, which typically is enough to reach about 150 meters over OM5 type fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Check Point CPAC-TR-100SWDM4 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850, 880, 910, 940nm nominal wavelength and a 850, 880, 910, 940nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 103.125 Gbps and such applications as 100G Ethernet (103.125 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.
Our compatible Check Point CPAC-TR-100SWDM4 module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Check Point networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Check Point platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.