10GB-4-F10-QSFP

Extreme Networks 10GB-4-F10-QSFP Compatible 4X10GB SFP+ to QSFP Fiber Breakout Cable 10M

# Key Highlights
  • Type: 40G Active Optical Breakout Cable
  • Compatibility: Extreme Networks compatible
  • Tx/Rx: 850 nm
  • Media Type: Multi-Mode Fiber (MMF)
  • Lenght: 10m
  • Data Rate: 2.125-41.2 Gbps
  • Temperature: Standard 0°-70°C
  • Low Power Consumption: 1.5W (Typical)
# Pricing & Ordering
SKU: 40G-AOC-QSFP-SFP-10-EX

107.36

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

DAC Cable Type:

OM3

TX Wavelength:

850 nm.

RX Wavelength:

850 nm.

Transmitter Type:

VSCEL Laser

Receiver Type:

PIN photodiode

Maximum Distance:

10m

Supported Data Rate:

2.125-41.2 Gbps

Supported Applications:

4 x InfiniBand QDR (32Gbps), 4 x InfiniBand DDR (16Gbps), 4 x InfiniBand SDR (8Gbps), 40G Ethernet (41.25Gbps), 10G Ethernet (10.31Gbps), 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel (2.125 Gbps)

DDM/DOM:

Supported

Temperature Range:

Standard 0°-70°C

Connectors:

QSFP, SFP+

Power:

+3.3V single power supply

Power Consumption:

1.5W

MTBF:

1 000 000 Hours

Compliance:

CE, QDR InfiniBand, QSFP+ MSA, RoHS, SFF-8431, SFF-8436, SFP MSA

Transceiver Type:

DAC

# Product Documentation
Multi-Vendor MSA Compatible 40G-AOC-QSFP-SFP Datasheet

Extreme Networks Compatible 10GB-4-F10-QSFP 40G Active Optical Breakout Cable is based on our product 40G-AOC-QSFP-SFP. When You will order it will be encoded to be compatible with Extreme Networks equipment and it will be labeled with part number: 40G-AOC-QSFP-SFP-10-EX, where EX means Extreme Networks Compatible. Above You can download datasheet of our 40G-AOC-QSFP-SFP product.

# Product Description

10GB-4-F10-QSFP is Extreme Networks compatible 4X10GB SFP+ to QSFP Fiber Breakout Cable 10M, operating over Multi-Mode Fiber (MMF). 40G Active Optical Breakout Cable is equipped with MSA standard compatible QSFP+ transceiver assembly at one end of cable and SFP+ assembly at each end of four breakouts. 40G Active optical breakout cable uses 4 x 850nm VCSEL transmitters and 4 x PIN photo-detector receivers operating over 4 parallel data lanes of OM3 MMF cable. Extreme Networks 10GB-4-F10-QSFP 40G Active Optical Breakout Cable supports 2.125-41.2 Gbps data rate and such applications as 4 x InfiniBand QDR (32Gbps), 4 x InfiniBand DDR (16Gbps), 4 x InfiniBand SDR (8Gbps), 40G Ethernet (41.25Gbps), 10G Ethernet (10.31Gbps), 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel (2.125 Gbps). Most popular applications of JNP-QSFP-AOCBO-10M (740-066717) compatible 40G Active Optical Breakout Cable are cost effective close range interconnections within equipment room of telecom operators or data centers, interconnecting LAN or SAN applications with speeds up to 40G.

10GB-4-F10-QSFP Extreme Networks compatible Active Optical Cable is based on our 40G-AOC-QSFP-SFP product, which is fully compliant with QSFP+ Multi Source Agreement (MSA) SFF-8436 standard, product safety standards and is CE/RoHS certified. We perform compatibility tests for 10GB-4-F10-QSFP Extreme Networks compatible Active Optical Cable with the most recent Extreme Networks networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Extreme Networks platforms! Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on our products. Feel free to Contact us – We will gladly learn about your needs and provide you with the best alternative of 10GB-4-F10-QSFP!