FTCD2523E1PCM

FTCD2523E1PCM Finisar Compatible 400GBASE-DR4 QSFP-DD Module

# Key Highlights
  • Type: 400GBASE-DR4 QSFP-DD
  • Compatibility: Finisar Compatible
  • Tx/Rx Wavelength: 4x1310nm PSM4
  • Laser: EML
  • Modulation: PAM4
  • Fiber Type: Single-Mode Fiber (SMF)
  • Connectors: MTP/MPO-12
  • Optical Budget: 3dB
  • Max. Distance: 500m
  • Data Rate: 425 Gbps
  • FEC Forward Error Correction: Supported
  • DDM/DOM: Supported
  • Power Consumption: ≤ 12W
  • Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 400G-QSFP-DD-500-FI

450.45

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

Connectors:

MTP/MPO

TX Wavelength:

1310 nm

RX Wavelength:

1310 nm.

Minimum Optical Budget:

3 dB

Maximum Distance:

500m

Supported Data Rate:

425 Gbps

Supported Applications:

400G Ethernet (412.5Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

EML Laser

Tx Wavelength Bandwidth:

1304.5- 1317.5 nm

Average Launch Power (Min) Each Lane:

-2.9 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3.5 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

1304.5- 1317.5 nm

Average Receiver Sensitivity (Min) Each Lane:

-5.9 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤12W

Power:

+3.3V

Chipset:

Inphi

Compliance:

100G Lambda MSA, 400GBASE-DR4, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE

# Product Documentation
Multi-Vendor MSA Compatible 400G-QSFP-DD-500 Datasheet

Finisar Compatible FTCD2523E1PCM QSFP-DD Module is based on our product 400G-QSFP-DD-500. When You will order it will be encoded to be compatible with Finisar equipment and it will be labeled with part number: 400G-QSFP-DD-500-FI, where FI means Finisar Compatible. Above You can download data-sheet of our 400G-QSFP-DD-500 product.

# Product Description

FTCD2523E1PCM is a Finisar Compatible 400GBASE-DR4 QSFP-DD (Quad Small Form-Factor Pluggable – Double Density) Transceiver designed for operation over Single-Mode Fiber (SMF) optical cable. On the transmission side module converts 8x 50G 400GAUI-8 PAM4 (Pulse-Amplitude Modulation) electrical input channels (each 53.125Gbps) into 4 parallel and independent Single Lambda 100G PAM4 optical signals. Reversely the opposite is done on the receiving side, module converts 4 parallel and independent Single Lambda 100G PAM4 CWDM optical signals into 8x 50G 400GAUI-8 PAM4 electrical inputs. Module has minimum guaranteed optical budget of 3 dB, which in most cases is enough to reach 500 m distance over OS2 single-mode fiber. However, distance is just indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. Finisar compatible FTCD2523E1PCM uses top quality quad channel EML driver together with 4 parallel EMLs (1310 nm) transmitter and 400Gb/s PIN photodiode array receiver. Compatible FTCD2523E1PCM supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. Finisar compatible FTCD2523E1PCM operates in Standard 0°-70°C temperature range and has MTP/MPO-12 interface.

Finisar compatible FTCD2523E1PCM support up to 425 Gbps data rate and is designed for 400G Ethernet application. Compatible FTCD2523E1PCM QSFP-DD Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.

Finisar is one of leading OEM manufacturer in our industry and their products are used by many equipment manufacturers. Our product EEPROM memory will be coded with necessary information to fully meet Finisar compatibility and will work seamlessly with platforms which support Finisar products. Transceiver is fully compliant to QSFP-DD Multi Source Agreement (MSA), 100G Lambda MSA 400G-DR4, CMIS 4.0, IEEE 802.3bs 400 Gbps specification. Transceiver is CE/RoHS certified and is compliant with product safety standards. We will be glad to know your requirements – Contact Us.